===========================================================================================
QUANTA Computer Inc. BIOS RELEASE NOTES for S5X/S5XQ (Insyde)
===========================================================================================
Project Name      : S5X/S5XQ
BIOS Version      : 3A18.Q202
Release Date      : 05/19/2022
Update BootBlock  : YES
Clear NVRAM       : YES     
BIN_fft Checksum  : 11EC2E35
BIN_hpm Checksum  : 0F928167
BIN     Checksum  : 0F8E4111
BIN_fft MD5       : 40F0187B86A40168162F4FD1A0BC687F
BIN_hpm MD5       : 714949A4DE770314594D791C675F05F6
BIN     MD5       : 0DCDF4294D92D382510A85AA29EDD717
===========================================================================================
                             HARDWARE REQUIREMENTS/REVISIONS
===========================================================================================
System hardware revision supported: S5X FAB4/FAB5/FAB6/FAB7 motherboard.

===========================================================================================
                             INTEL PROCESSOR MICROCODE REVISIONS
===========================================================================================
------------------------+------------------------------------------------+-----------------
Filename                | Description                                    | Stepping(s)     
------------------------+------------------------------------------------+-----------------
m_87_606a4_0b000280.inc | L-0         stepping processor signature 606A4 | ICX-SP HCC L-0                
m_87_606a5_0c0002f0.inc | C-0         stepping processor signature 606A5 | ICX-SP XCC C-0                
m_87_606a6_0d000331.inc | D-1/D-2/M-1 stepping processor signature 606A6 | ICX-SP XCC D-1/D-2/M-1
------------------------+------------------------------------------------+-----------------

===========================================================================================
                             SYSTEM FIRMWARE REQUIREMENTS/REVISIONS
===========================================================================================
BIOS Core Version                 : 5.42.23
BIOS Compliancy                   : UEFI 2.7.0; PI 1.7
Insyde BIOS Label                 : 05.42.23.0063
VGA (Nuvoton NPCM750R)            : 4.0WI
Intel(R) SPS F/W (ME)             : SPS_E5_04.04.04.062.0
Intel(R) SPS F/W OEM Vendor Label : 0x44062000
Intel(R) RC                       : 27.P52
Intel(R) BIOS ACM                 : 1.0.E (PW)
Intel(R) SINIT ACM                : 1.0.F (PW)
Intel(R) VROC PreOS Components    : 7.7.0.1054
FFT Version                       : 200.02.00.02
Intel BKC Version                 : 2021_WW52(Kit 709738) 
DCPMM Module Firmware             : fw_bwva1_2.2.0.1553_rel.bin

===========================================================================================
                           IMPORTANT INSTALLATION NOTES
===========================================================================================
WARNING:
A. It is important to follow the flash option provided in the batch file (BIOS_efi64.nsh/ME_efi64.nsh for UEFI Shell,
   BIOS_win64.cmd/ME_win64.cmd for Windows 64 bits, BIOS_lnx64.sh/ME_lnx64.sh for Linux 64 bits). 
   Using incorrect flash option to flash BIOS may cause damage to your system.
B. If use ME_xxx64 script to flash ME, perform DC cycle is required because the ME region data will be changed on each BIOS release image even if the ME version is not changed.

1. Burn 1AXX.BIN via fixture.

2. For UEFI Shell environment, follow below steps to update BIOS:
   (1) Unzip the release package to the same folder in a HDD or USB Flash Drive.
   (2) Insert the USB Flash Drive or HDD mentioned in step (1).
   (3) Power on the system and boot into "Build-in EFI Shell"
   (4) Execute batch file BIOS_efi64.nsh to update BIOS.
   (5) Execute batch file ME_efi64.nsh to update ME FW.
   (6) After the update finished, reboot the system, the new BIOS/ME FW runs.
 
3. For x64 Windows environment, follow below steps to update BIOS:
   (1) Power on the system and boot into Windows OS.
   (2) Unzip the release package to the same folder in the HDD.
   (3) Open Command Prompt, change to the folder with release package located.
   (4) Execute batch file BIOS_win64.cmd to update BIOS.
   (5) Execute batch file ME_win64.cmd to update ME FW.
   (6) After the update finished, reboot the system, the new BIOS/ME FW runs.
   
4. For x64 Linux environment, follow below steps to update BIOS:
   (1) Power on the system and boot into Linux OS.
   (2) Unzip the release package to the same folder in the HDD.
   (3) Open Terminal, change to the folder with release package located.
   (4) Type "chmod -R 777 *" to change privilege for all files and folders.
   (5) Execute batch file BIOS_lnx64.sh to update BIOS.
   (6) Execute batch file ME_lnx64.sh to update ME FW.
   (7) After the update finished, reboot the system, the new BIOS/ME FW runs.
   
Note:
- BIOS image usage:
    XAXX.BIN_fft  - Used in in-band Flash scripts. (FFT tool)
    XAXX.BIN_hpm  - Used in BMC to flash BIOS.
    XAXX.BIN      - For factory/SPI Flash programmer to program into SPI ROM
- BIOS_efi64.nsh/BIOS_win64.cmd/BIOS_lnx64.sh updates BIOS region only.
- ME_efi64.nsh/ME_win64.cmd/ME_lnx64.sh updates non-BIOS regions only.
  In Ubuntu, it will appear the "mei could not read FW version" and "mei FW version command failed -5" messages when updating the non-BIOS regions.
- User should execute the load default function for getting the right settings if the Board ID changes.
- Default parameter in update script would keep current setting except for the ROM layout change case. If you would like to load default instead,
  you can remove /RVA parameter to use following command to do so:
   <H2OFFT> <ROM File>  /BIOS /ALL /DF /N /SRC /RMC /Y
  Note: <H2OFFT> would be ./fftlnx64/h2offt for Linux x64, fftefi64\H2OFFT-Sx64.efi for UEFI Shell or
        fftwin64\H2OFFT-Wx64.exe for Windows x64.
  Or using <H2OUVE> -l to load default, and then reboot the system. 
- "Regions in the BIOS image and the onboard ROM do not match."
  "All changes to BIOS settings will be lost."
  "Do you want to continue?(Yes/No):"
  The warning message above will appear when using the H2OFFT tool to flash BIOS with ROM layout change.
  If user want to set it default to Yes without manual input, user can add /Y right after /RMC in BIOS update script.
- This PCD-"PcdBiosDfxKnobEnabled",current Intel RC already set to FALSE, Mainly is Security Problem, and this PCD-"PcdBiosDfxKnobEnabled" will  
  effect PCIe error injection funtion.If you want test PCIe error injection, please contact on-site BIOS engineer build an debug version with PCD-"PcdBiosDfxKnobEnabled"
  enabled.
- Please note that using FFT tool to update BIOS from 2A16 to 3A01(Or higher version), please remove /RVA in BIOS update script. And update BIOS from 2A15(Or lower version) to 3A01(Or higher version), please add /SSB in BIOS update script.
- Please note that update BIOS from 2A16(Or lower version) to 3A01(Or higher version) from BMC web, please select "Restore BIOS settings to default" before update BIOS.
- Please note that after update BIOS and SPS ME to 3A02, if you need update SPS ME FW, Please update it from BMC Web. That means you need update BIOS and SPS ME FW at the same time.
  Because there is a timing issue on new SPS ME FW.
- For security reasons, set the SPI ROM DESC area to read-only.
  DESC region in 3A16.Q401 is unlock, in 3A16.Q402 and later will be lock.
  In Band Flash cannot modify the DESC area If you need to modify DESC, please use the WebUI or SPI Flash programmer to update BIOS.
  3A16.Q402 ME_efi64.nsh/ME_lnx64.sh/ME_win64.cmd had remove "/DESC" paramter.
    For In-band flash 3A16.Q401->3A16.Q402 and make the DESC lock, please add /DESC parameter on above script manually.
- 3A17.Q101 modify BIN mapping to sync with PFR version.
    Please use Out-of-band (WebUI) to upgrade BIOS from 3A16.Q402 (and earlier) to 3A17.Q101 (and later).
    or to downgrade from 3A17.Q101 (and later) to 3A16.Q402 (and earlier).

===========================================================================================
                             KNOWN ISSUES/WORKAROUNDS
===========================================================================================  
3A17.Q101 :
- FFT Tool always show "Regions in BIOS image and the onboard ROM do not match".
    This is tool issue, script will remove /RMC on this version until the new tool fix this issue.
- FFT Tool flash ME cannot show ME version (always show New ME Version: 0.0.0.0). Wait for new tool to fix it.

3A11 :
- FFT Tool command "-RMC" will not add to 3A11 flash script because the tool have issue and our tool team are working on it.

3A10 :
- Power Profile feature can't modify by UVE tool and Redfish since we have not finished it. 

3A04 :
- To in-band upgrade to 3A04, please flash in order 3A02-> 3A03-> 3A04 due to the SecureFlash key change.
- To out-of-band upgrade to 3A04, please use BMC 3.10 and higher version to flash in order 3A02->3A04.
- After upgrading to 3A04, the system cannot be downgraded to 3A03 and lower versions. 
- Because 3A04 BIOS have disable the DCI interface and it belong to description region of SPS ME. You need set SW3 BIT1(FLASH_SECURITY_OVERRIDE_STRAP) to on before update SPS ME FW.
   But we found this jumper will cause BMC malfunction. And we are still working on it. So Please update BIOS and SPS ME FW from 3A02 to 3A04 through BMC Web.
 
3A02 :
- After SPS ME FW update to SPS_E5_04.04.03.263.0. We found a timing issue. We need to do a global reset or S5 power cycle before update SPS ME FW from FFT tool.
  We are still checking this timing issue with Intel.

2A16 :
- After RC code update to BKC 2020_WW47 and ME FW update to SPS_E5_04.04.03.249.0. We found that ME upgrade/downgrade will fail.
  So we did not update the ME FW to SPS_E5_04.04.03.249.0 and keep the ME FW at SPS_E5_04.04.03.192.0.

- Error Injection function fail on PVT. Because Cscripts command can't work. We are working on it.

2A13 :
- After RC code update to BKC 2020_WW43 and ME FW update to SPS_E5_04.04.03.228.0. We found that warm reset will cause ME function abnormal.
  So we did not update the ME FW to SPS_E5_04.04.03.228.0 and keep the ME FW at SPS_E5_04.04.03.192.0.

2A08 :
- SGX funtion failed

2A07 :
- After RC update to BKC 2020_WW32. SGX funtion failed

===========================================================================================
                             FEATURES ADDED/MODIFY
===========================================================================================
3A18.Q202:
 - Rollback Legacy ADR Mode to Disable due to RC has fixed the bug.
 - Update slot power limit scale and value of CPU and PCH root port.

3A18.Q201:
 - Merge Samsung Universal PPR solution.
 - Merge single CPU solutions.
 - Fixed FFT cannot show new ME version.
 - Upgrade InsydeHttpsSupportDxe driver from 05.41.34.0922 to 05.41.34.0922.1925 for fix "Redfish HTTP transportation failed"
 - Improve redfish smbios_current.json for type 38
 
3A17.Q103:
 - None.
 
3A17.Q102:
 - Merge Samsung Universal PPR solution.
 - Merge single CPU solutions.
 - Fixed FFT cannot show new ME version.
 - Upgrade InsydeHttpsSupportDxe driver from 05.41.34.0922 to 05.41.34.0922.1925 for fix "Redfish HTTP transportation failed"
 - Improve redfish smbios_current.json for type 38
 - Change the "Boot Guard Profile" setting from 5 to 0.
 - Implement QCT BIOS send DPC SEL log when DPC is triggered.
 - Implement OemClearPciConfigStatus module.
 - Rollback Legacy ADR Mode to Disable due to RC has fixed the bug.

3A17.Q101:
 - Modify BIN mapping to sync with PFR version.
 - Update BKC to 2021WW39(MR7)
    Microcode udpate to m_87_606a6_0d000311 from m_87_606a6_0d0002e0
    SPS keep SPS_E5_04.04.04.058.0, no update.
    RC update to 21.P41 from 21.P25
 - Update Insyde chiset label to 05.42.23.0062 from 05.42.23.0060
 - Update fft tool version to 200.02.00.02
 - For fix CVE-2020-10713 by OEM update DBX binary that UEFI web posted at April 29, 2021.

3A16.Q402:
 - DESC region is set to read-only due to security consideration, see "IMPORTANT INSTALLATION NOTES" for more information.
 - Fix GPU subsystem id incorrect issue.
 - "Display Mode" change default from "Plug In First" to "On Board First".
 - Modify the keyboard repeat rate to improve the sensitive problem of keyboard.
 - Follow BMC's request to modify SPS XML setting.

3A16.Q401:
 - Update BKC to 2021WW32(MR5)
    Microcode udpate to m_87_606a6_0d0002e0 from m_87_606a6_0d000280
    SPS update to SPS_E5_04.04.04.058.0 from SPS_E5_04.04.04.053.0
    RC update to 21.P25 from 20.P95
 - Update Insyde chiset label to 05.42.23.0060 from 05.42.23.0055
 - Follow EA's request to set PCH DMI CTLE to 12.
 - Follow EE/Intel request to set ADR to HW flow ("Legacy ADR Mode" default to Enable).
    refer to MOW WW32

3A15.01:
 - Add setup item "Redfish Keeps Host Interface", and default is Disable for HLK BSOD issue.
 - Default set "Adjust Non-BIOS Boot Option" to Disable for HLK  "Boot from USB (ServerOperating System)".
 - Hidden Advanced->NVM Express Information.
 - Implement OEM ipmi command: Set VMD Configuration.
 - Update FFT tool to below version:
    Shell : 200.00.00.20
    Windows : 200.01.00.25
    Linux : 200.01.00.24

3A15:
 - Follow EE request to modify S5XQ USB3 port 3 and port 4 setting.

3A14:
 - Update SMBIOS type 9 to meet S5XQ HW SPEC v0.02 definitions.
 - Adjust SPS ME setting to fix NM script issue.

3A13:
 - Modify the setup option "Therm-Monitor-Status Filter" default setting to "Enabled".
 - Please note that after using FFT tool or BMC web to update BIOS, you need enter Setup Menu to Load Default since 3A13 BIOS have adjust MRC setup option default value.

3A12:
 - Add USB 2.0 patch.
 - Add PCIe correctable error patch.

3A11:
 - Support UVE and Redfish to modify Power Profile feature.
 - Adjust S5XQ IIO bifurcation.
 - Please note that after using FFT tool or BMC web to update BIOS, you need enter Setup Menu to Load Default since 3A11 BIOS have adjust MRC setup option default value.

3A10:
 - Update BIOS Core Version to 05.42.23.0055
 - Update Intel BKC to 2021_WW15, RC code and Microcode.
 - Please note that after using FFT tool or BMC web to update BIOS, you need enter Setup Menu to Load Default since 3A10 BIOS have adjust MRC setup option default value.
 - Change setup item wording from "HDD Security Erase" to "Secure Erase Support".
 - Add Power Profile feature.

3A09:
 - Fix S5XQ IIO bifurcation and VPP table issues.
 - Update S5XQ SMBIOS Type 8/9 information.

3A08:
 - Update BIOS Core Version to 05.42.23.0053
 - Update Intel BKC to 2021_WW11, RC code and Microcode.
 - Please note that after using FFT tool or BMC web to update BIOS, you need enter Setup Menu to Load Default since 3A08 BIOS have adjust MRC setup option default value.

3A07:
 - Update BIOS Core Version to 05.42.23.0052
 - Update Intel BKC to 2021_WW10, RC code and Microcode.
 - Update SPS ME FW to SPS_E5_04.04.04.053.0.
 - Modify SMIBOS type 1 wake-up type to "06" by default.
 - Please note that Flash tool already updated on 3A07 release package.
 - Please note that after using FFT tool or BMC web to update BIOS, you need enter Setup Menu to Load Default since 3A07 BIOS have adjust MRC setup option default value.

3A06:
 - Please note that after using FFT tool or BMC web to update BIOS, you need enter Setup Menu to Load Default since 3A06 BIOS have adjust MRC setup option default value.

3A05:
 - Please note that after using FFT tool or BMC web to update BIOS, you need enter Setup Menu to Load Default since 3A05 BIOS have adjust MRC setup option default value.

3A04:
 - Update BIOS Core Version to 05.42.23.0049
 - Update Intel BKC to 2021_WW03, RC code and Microcode.
 - Follow QCT rule, set PPR default to Hard PPR in PVT phase.
 - Modify SPS ME setting to disable DCI interface.
 - Please note that after using FFT tool or BMC web to update BIOS, you need enter Setup Menu to Load Default since 3A04 BIOS have adjust MRC setup option default value.
 - Please note that 3A04 BIOS must works with BMC FW 3.10.

3A03:
 - Please note that 3A03 BIOS have SecureFlash key change. And 3A03 BIOS is a transitional version. The 3A04 BIOS release will be the formal release version.


3A02:
 - Update SPS ME FW to SPS_E5_04.04.03.263.0.
 - Please note that after update BIOS and SPS ME to 3A02, if you need update SPS ME FW, Please update it from BMC Web. That means you need update BIOS and SPS ME FW at the same time.
   Because there is a timing issue on new SPS ME FW.

3A01:
 - Update BIOS Core Version to 05.42.23.0047
 - Update Intel BKC to 2020_WW51, RC code and Microcode.
 - Please note that using FFT tool to update BIOS from 2A16 to 3A01(Or higher version), please remove /RVA in BIOS update script. And update BIOS from 2A15(Or lower version) to 3A01(Or higher version), please add /SSB in BIOS update script.
 - Please note that update BIOS from 2A16(Or lower version) to 3A01(Or higher version) from BMC web, please select "Restore BIOS settings to default" before update BIOS.

2A16:
 - Update BIOS Core Version to 05.42.23.0045
 - Update Intel BKC to 2020_WW47, RC code and Microcode.
 - Please note that after using FFT tool or BMC web to update BIOS, you need enter Setup Menu to Load Default since 2A16 BIOS have adjust MRC setup option default value

2A15:
 - Adjust SPS ME setting
   (1). Disable PSU 0 and PSU 1
   (2). Set OEM power sensor to 1000ms
 - Set EINJ support to disable by default.
 - Please note that after using FFT tool or BMC web to update BIOS, you need enter Setup Menu to Load Default since 2A15 BIOS have adjust Setup option default value

2A14:
 - (BIOS.Feature.020) Implement "Assert NMI for PCIe error" option.
 - (BIOS.Feature.022) Filter out MRC warning codes generated by enabling SGX/TME.
 - Chance the Console Redirection Option ROM location to E segment.
 - Change the default setting of PXE hotkey policy from PXE only to PXE first.
 - Change the default setting of Console Redirection Text Mode Resolution to Force 80x25.
 - Hide more Setup Items according to the !QCT-Std_BIOS SPEC(Whitley_EagleStream)-V1.6-Draft_20201120.xlsx
 - Please note that after using FFT tool or BMC web to update BIOS, you need enter Setup Menu to Load Default since 2A14 BIOS have adjust Setup option default value
 - Please note that Flash tool already updated on 2A14 release package. 2A14 BIOS and new FFT tool fix issue #332566 and #343711. So if you use 2A14 release package to
   upgrade BIOS and SPS ME. Make sure you update BIOS first and reboot system,then update SPS ME. And you can see the correct information about ME Version when you 
   upgrade SPS ME.
 - Please note that new FFT tool on Linux and Windows also improve the upgrade process. 

2A13:
 - Update BIOS Core Version to 05.42.23.0043
 - Update Intel BKC to 2020_WW43, RC code and Microcode.
 - Please note that after using FFT tool or BMC web to update BIOS, you need enter Setup Menu to Load Default since 2A13 BIOS have adjust MRC setup option default value
 
2A12:
 - Hide more Setup Items according to the document "S5X_SetupItems_V0.9_2020_0906_Hidden item review_1021.xlsx".
 - Please note that after using FFT tool or BMC web to update BIOS, you need enter Setup Menu to Load Default since 2A12 BIOS have adjust MRC setup option default value

2A11:
 - Update BIOS Core Version to 05.42.23.0040
 - Update Intel BKC to 2020_WW36, RC code and Microcode.
 - Adjust SPS ME setting
   (1). Enable PSU 0 and PSU 1
   (2). Disable OEM power sensor
 - Please note that after using FFT tool or BMC web to update BIOS, you need enter Setup Menu to Load Default since 2A11 BIOS have adjust MRC setup option default value
 - Please note that BIOS upgrade/downgrade have issue which cause from MRC does not correctly save the RC version to nvram data.
   Insyde will enhance this in 2A11 BIOS, but cannot change 2A10 RC behavior.
   If system hangs by upgrade/downgrade 2A10<->2A11 and hangs on MRC phase, below is workaround
   (1) Change DIMM location or change DIMM module to different one.
   (2) Clear CMOS.

2A10:
 - Please note that before using FFT tool to update SPS ME, you need AC off first and set SW3 BIT1(FLASH_SECURITY_OVERRIDE_STRAP) to on then AC on, because 2A10 BIOS have adjust the description region of SPS ME.
 - Please note that after using FFT tool or BMC web to update BIOS, you need enter Setup Menu to Load Default since 2A10 BIOS have adjust MRC setup option default value

2A09:
 - None.

2A08:
 - None.

2A07:
 - Update BIOS Core Version to 05.42.23.0038
 - Update Intel BKC, RC code and Microcode.
 - BIOS.Feature.007 - Threshold of CECC SEL disabled = 10 SEL log (by rank)
 - Add GPIO check for BMC ready before IPMI initial BMC.
 - Update the watchdog time range to 1~30, and set the FRB watchdog as enabled by default.
 - Change SMM KCS address to 0xCA8 and 0xCAC.
 - Add BIOS variable preserved feature. Please update all Flash Part(64MB) for this BIOS Release. Because we have update flash map for this feature.
 - (BIOS.Feature.018) Implement "HDD Security Erase" option.

2A06:
 - (BIOS.Feature.012) Setup item for Print POST CODE on console (COM port) during POST time. Default is Disabled.

2A05:
 - Update BIOS Core Version to 05.42.23.0035
 - Update Intel BKC, RC code and Microcode.
 - Add WOL, Wake up on PME support.

2A04:
 - Add SMBIOS-FRU _ Memory / PCIe /UPI error threshold leaking bucket.
 - Add time countdown for hotkey detecting.

2A03:
 - Secure Flash Feature enable. Can't flash BIOS from 2A03 to 2A02.

2A02:
- BIOS will wait (120 sec) for BMC ready on PEI or DXE.
- DIMM location info to POST code loop sequence.
- Send DIMM manufacture Info.
 
2A01:
- Update Diagnostic screen message
- Add SMBIOS Type 198,199 support
- Add OEM IPMI command : 1.Set System MAC
                         2.Send POST Start
                         3.Send POST End
- FRB2/OS Watchdog Timer
- Add RAS function : 1.IEH (IIO Error)

1A04:
- Update Intel BKC to 2020_WW17.
    Intel RC: 16.D46
    Intel SPS F/W: SPS_E5_04.04.03.063.0
    Microcode m_97_606a0_80000031.inc | A-0 | ICX-SP LCC Stepping
              m_87_606a4_8b0001b0.inc | A-0 | ICX-SP HCC Stepping
              m_87_606a5_8c000090.inc | A-0 | ICX-SP XCC Stepping
    
- Add SMBIOS Type 165,190,192,193,194,195,196,197 support
- Update Diagnostic screen message
- Add OEM IPMI command : 1.Get BMC Information 
                         2.Set PCIE information
                         3.Set HDD  Location 
                         4.Set HDD Serial Number 
                         5.Set HDD Model Name 
                         6.Set HDD FW Version 
                         7.Set HDD Capacity
                         8.Set Max HDD  Quantity 
                         9.Set HDD Type 
                        10.Set HDD WWN 

- Add RAS function : 1.MCER
                     2.Memory ECC
                     3.PCIe
                     4.Post Error
                     5.WHEA/AEPI
                     6.EMCA Gen1/Gen2 Firmware First
                     7.SEL Log Format
                     
- Initial POST CODE LED on BMC SIO.

1A03:
- BIOS Password Jumper support.
- Modify BIOS Password behavior to meet the requirement.
- SMBIOS Type 1,2,3,8,9 data update.
- Add OEM IPMI command : 1.Set Processor Information
                         2.Set DIMM Information

1A02:
- BIOS Recovery Jumper support.
- Redfish Host Interface.
- RAM Disk function.

1A01:
- Initial official released version.
- OEM Hot key and Logo.
- Interface to get Board ID Table from EEPROM.
- Clock Generator configuration code for chip 9FGL08.
- Riser 2A Bifurcation configuration.

===========================================================================================
                             FEATURES REMOVED
===========================================================================================
3A18.Q202:
 - Remove comparing the PFR Key between the Recovery region and the update capsule via BIOS, let PFR do it.

3A18.Q201:
 - None.
 
3A17.Q103:
 - None.
 
3A17.Q102:
 - None.

3A17.Q101:
 - None.

3A16.Q402:
 - None.

3A16.Q401:
 - None. 

3A15.01:
 - None. 
 
3A15:
 - Follow EE request to remove USB2 repeater setting.

3A14:
 - None.

3A13:
 - None.

3A12:
 - None.

3A11:
 - None.

3A10:
 - None.

3A09:
 - None.

3A08:
 - None.

3A07:
 - None.

3A06:
 - None.

3A05:
 - None.

3A04:
 - None.

3A03:
 - None.

3A02:
 - None.

3A01:
 - None.

2A16:
 - None.

2A15:
 - None.

2A14:
 - None.

2A13:
 - None.

2A12:
 - None.

2A11:
 - None.

2A10:
 - None.

2A09:
 - None.

2A08:
 - None.

2A07:
 - None.

2A06:
 - None.

2A05:
- None.

2A04:
- None.

2A03:
- Remove RSD feature.

2A02:

2A01:
 - SetDimmInformation and SetProcessorInformation are removed in ver.3.24, Remove those two functions.
1A04:
- N/A.

1A03:
- N/A.

1A02:
- N/A.

1A01:
- N/A.
===========================================================================================
                             ISSUES FIXED
===========================================================================================
3A18.Q202:
 - Fix E-Track issue (S5X E-Track)
    #394598 [2022 Q2][BIOS]BIOS can not preserve setting after upgrade from 3A17.Q103 to 3A18.Q201 (inband/webUI either)
    #388465 [2022-Q1][BIOS]After press F10 to save and reboot SUT which press F9 to load default found Console Redirection setting have changed with BIOS 3A17.Q102(VRCID:242476)
    #388426 [2022-Q1][BIOS]BIOS 3A17.Q102(VRCID:242476) default setting about legacy ADR mode is different to 3A17.Q101
    #386552 [2022-Q1][BIOS] After inject Memory CA Parity / Correctable ECC Error, BMC SEL does not record Memory Parity SEL log (BIOS 3A16.Q401 with BMC 3.52 passed )
    #378930 [BMC_Full]LabelVersion show ''1.2'' via BIOS not match ''12'' get from Redfish command /redfish/v1/Systems/{SystemID}/Memory/Oem/Quanta/BPS/Namespaces/{NamespaceID}.
    #346282 [DVT][Insyde] Some of Help Text doesn't have dot at the end of sentence.

3A18.Q201:
 - Fix E-Track issue (S5X E-Track)
    #383342 [2022 Q1][BIOS] The BIOS POST and BIOS setup menu show that BMC IPv6 address is 0:0:0:0:0:0:0:0 and BMC IPv6 address source is static, after enabling BMC IPv6 DHCPv6/SLAAC on BMC WebUI. (Copied from #370064)
    #384864 [2022_Q1]BIOS version do not change after use BMC WebUI to flash 3A17.Q101 with active region success (PFR version)
    #385632 [2022-Q1][BIOS]New ME version shows 0.0.0.0 during flash ME.
    #379822 [2021-Q4][BIOS] Update BIOS without /RVA, the item ''Delayed Authentication Mode (DAM) Override'' can not be modified in UVE 200.02.00.05 script.
    #381587 [2022 Q1-BIOS] Advanced > Console Redirection > SOL settings will change to load default settings after press F9 and Exit discarding changes.

3A17.Q103:
 - Fix E-Track issue (S5X E-Track)
    #388426 [2022-Q1][BIOS]BIOS 3A17.Q102(VRCID:242476) default setting about legacy ADR mode is different to 3A17.Q101
    #388465 [2022-Q1][BIOS]After press F10 to save and reboot SUT which press F9 to load default found Console Redirection setting have changed with BIOS 3A17.Q102(VRCID:242476)
    #388332 [2022-Q1][BIOS]BIOS post code have stock in 0XD1 and can not boot into BIOS after inband downgrade 3A17.Q102 to 3A17.Q101 and reboot system. 

3A17.Q102:
 - Fix E-Track issue (S5X E-Track)
    #383342 [2022 Q1][BIOS] The BIOS POST and BIOS setup menu show that BMC IPv6 address is 0:0:0:0:0:0:0:0 and BMC IPv6 address source is static, after enabling BMC IPv6 DHCPv6/SLAAC on BMC WebUI. (Copied from #370064)
    #384864 [2022_Q1]BIOS version do not change after use BMC WebUI to flash 3A17.Q101 with active region success (PFR version)
    #385632 [2022-Q1][BIOS]New ME version shows 0.0.0.0 during flash ME.
    #346282 [DVT][Insyde] Some of Help Text doesn't have dot at the end of sentence.
    #379822 [2021-Q4][BIOS] Update BIOS without /RVA, the item ''Delayed Authentication Mode (DAM) Override'' can not be modified in UVE 200.02.00.05 script.
    #381587 [2022 Q1-BIOS] Advanced > Console Redirection > SOL settings will change to load default settings after press F9 and Exit discarding changes.
    #386552 [2022-Q1][BIOS] After inject Memory CA Parity / Correctable ECC Error, BMC SEL does not record Memory Parity SEL log (BIOS 3A16.Q401 with BMC 3.52 passed )

3A17.Q101:
 - None.

3A16.Q402:
 - Fix E-Track issue (S5X E-Track)
    #373760 [BIOS] QCT_SetupItems_V1.4_2021_0722 ''WHEA Support'' should not be hidden item.
    #374956 [2021-Q4][BIOS]VT_100+ typo in SOL/COM0 is not match between SPEC/BIOS and after setting show
    #357879 [DVT][Insyde] SMBIOS Type 8/9 list should separate to S5X / S5XQ and follow HW spec defined connector's silkscreen name.
    #378310 [BMC_Full] The SMBIOS data does not match between SMBIOS and Redfish. (URI :/redfish/v1/Systems/system/Oem/Insyde/SMBIOS)
    #378381 [BIOS_Q4] SUT can not get info when set HWPM with OOB mode (capabilities/ request)
    #379464 [2021-Q4][BIOS] SOL screen POST Hard Disk Security page has text "Press ESC Abort Hard Disk Security", but RKVM and SUT Host screen does not has it.
    #375840 [2021-Q4][BIOS] "NV Index PO LCP Definition" has no data after BIOS setup TPM2.0 Provisioned Enabled, command "TxtBtgInfo.efi -c a -p", it report data for "NV Index PS LCP Definition, NV Index Aux Definition",
    #375845 [2021-Q4][BIOS] After Setup BIOS TPM2.0 provisioned enabled / TXT enabled, test "getsec64CBnT.efi -l SENTER -a", "getsec64CBnT.efi -l SEXIT" report ACM / TXT error.
    #377365 [BIOS_Q4]BMC SEL didn't record ''Correctable ECC Logging Limit Reached'' event when I inject Memory Correctable Error for 11 times.
    #378331 [2021-Q4][BIOS]SEL trigger PCIe Bus Correctable Error Log is Disabled (Bus 16 / Dev 02 / Fun 00) - Asserted when use APEI to trigger error
    #372873 [HLK][S5X-insyde][Win2022 certification] Run 'Hardware Security Testability Interface Test'' failed.
    #379110 [BMC Full][BMC 3.57.00] BMC logs "System Firmwares POST Error | Unknown Error | Asserted" event during RHEL 8.2 warm boot cycle test around 480 loops.

3A16.Q401:
 - Fix E-Track issue (S5X E-Track)
    #368363 [MP+90d] System will boot PXE instead of USB after setting "one boot " "Legacy" " USB" via BMC WebUI. (UEFI mode Passed)
    #366797 [Final REG][SKU 109] The system does not back to first boot option HDD(UEFI) after reboot the system. (After set the boot source override "One-boot", Mode "Legacy", Boot Device Selector "PXE")
    #369617 [PFR][Insyde]PFR BIOS can flash from normal BIOS
    #351176 [DVT][Redfish][unblock] SSD has "rotationspeedRPM" property, it is abnormal.
    #372879 [HLK][S5X-insyde][Win2022 certification] Run "Check SMBIOS Table Specific Requirements" failed.
    #372871 [HLK][S5X-insyde][Win2022 certification] Run "secure_boot_logo tset" failed.

3A15.01:
 - Fix factory hang 0xA2 issue.
 - Fix E-Track issue (S5X E-Track)
    #363656 [PVT][Insyde] Inject Memory correctable error and wait 24hrs inject again, Memory Correctable Error Disable Threshold count does not reset. BMC record "Memory Correctable ECC logging is disabled (CPU0_A0_Rank0)"
    #363324 [S5X][REG011] After clear CMOS via IPMI command, the BIOS settings does not restore to default.
    #363192 [PVT][Insyde] Memory RAS Configuration Correctable Error Threshold can setup "0", it does not match help txt "1-32767".
    #363125 [PVT][Insyde] After inject all DIMM's memory correctable error, BMC record duplicated memory CE log of previous DIMM slot channel 1 (CPU0/1 A1, C1, E1, G1) for slot CPU0/1 B0/B1, D0/D1, F0/F1, H0/H1.  Similar#329094.
    #362929 [PVT][Insyde] After inject Memory CA Parity / WR CRC Error, BMC SEL does not record Memory Parity SEL log (D2 CPU). (BIOS 3A07 +D1 CPU PASS)
    #360420 [PVT][Insyde] There is no SEL "Correctable PCIe Error Logging Disabled - Asserted" after injecting PCIe CE error over 10 times by ITP. (Limit check set to 10)
    #360264 [PVT][Insyde] There is no corresponding SEL after injecting "IEH Correctable Error" by ITP. (DVT BIOS 2A12 + BMC 2.11 Passed before)
    #359632 [HLK][S5X_Insyde][Win2019 certification] Run "Boot from USB (ServerOperating System)" failed.
    #351850 [PVT][Insyde] Please help to confirm which specification document can check whether the TPM module supports the "Interface Type Selection" function.
    #340149 [DVT][Insyde] BIOS option has no Pwr/Perf Profiles. (Custom / Energy-Saving Mode / High Performance)
    #363372 [HLK][S5X_Insyde][Win2019 certification] Run "USB3 Termination", system report BSOD.
    #348447 [PVT][Insyde][Unblock] After BIOS 2A15 downgrade to 2A07, system hang up at black screen. But BIOS readme does not describe about map layout changed and protected it.
    #368747 [2nd source]The system can not detect NVMe SSD after enable VMD function under BIOS.
    #359415 [HLK][S5X_Insyde][Win2019 certification] Run "Crashdump Support Test (LOGO)" failed.
    #358787 [HLK][S5X_Insyde][Win2019 certification] Run "BitLocker Tpm and Recovery password tests for NONAOAC devices with PCR[7]" failed.
    #349019 [DVT][Insyde][unblock] SUT cannot be powered on by IPMI or WebUI remotely after flashing BIOS from 2A15 to 2A16; BMC keep 2.15.
    
3A15:
 - Fix E-Track issue
    #368691 [T4] System cannot boot into BIOS (POST screen) after changing PCIe SR-IOV setting from 'Enabled' to 'Disabled'.
    #367914 31S5XMB00R0 BMC SYNC TIME FAIL
    #370032 [Sync S5Z/Insyde-MTK] [PVT_SYS1] Disable BMC IPv6, legacy BIOS POST shows abnormal message. (UEFI mode pass)

3A14:
 - Fix E-Track issue
    #366228 [Final REG]NM script fail at "Set Sensor Thresholds".
    #364248 [REG002][SKU 109] The type 9 of SMBIOS does not match with the S5XQ HW SPEC v0.02 definitions.
    #364022 [PVT][Insyde] After inject Poisoned TLP Egress Blocked Status error, BMC does not record Fatal Bus error and Poisoned TLP Egress Blocked Status error.
    #366549 [Final REG] BMC has no Memory Uncorrectable ECC error SEL after triggering Memory Uncorrectable error injection via ITP.
    #364248 [REG002][SKU 109] The type 9 of SMBIOS does not match with the S5XQ HW SPEC v0.02 definitions.
    #365215 [REF002][SKU 109] The System hang at OS RHEL 8.2 after enable the VMD function. (PCIe Switch FW is 0.6.0 / VRC ID:226926)
    #366897 [CCL] SCT-MediaAccessTest Fail (w/ MCX631102AN-ACAT NIC card + HBA 3816B card)
    #345775 [DVT][Redfish 1.9] Please clarify how can i compare attribute "Component" value under /redfish/v1/Systems/{SystemsId}/Oem/Insyde/PCIeFunctions. (PCH, BMC, Slotx, CPUx)

3A13:
 - Fix E-Track issue 
    #359512 [PVT][Insyde] System hang up and BMC SEL record IERR error log after flash BIOS 3A06 (inband script reboot system.)(Similar as#352194)
    #356518 [DVT][SKU80]The NVME SSD qt'y is not match with WEB UI and OS.
    #355824 [DVT][Insyde] Intel Selftest 7 report error and warning log.
    #362929 [PVT][Insyde] After inject Memory CA Parity / WR CRC Error, BMC SEL does not record Memory Parity SEL log
    #364174 [DVT_SYS1_N2-1] BIOS setup copyright year is still 2020. (should be 2021)
    #363656 [PVT][Insyde] Inject Memory correctable error and wait 24hrs inject again, Memory Correctable Error Disable Threshold count does not reset.
    #363337 [S5X][REG011] The number of system MAC does not match between OS and SMASH. (There are three NIC cards in the system)
    #360310 [PVT][CCL] System recorded an abnormal about 'Error adding keys to platform keyring UEFI:db ' after booting into OS

3A12:
 - Fix E-Track issue 
    #351850 [PVT][Insyde] Please help to confirm which specification document can check whether the TPM module supports the "Interface Type Selection" function.
    #363324 [S5X][REG011] After clear CMOS via IPMI command, the BIOS settings does not restore to default.
    #363125 [PVT][Insyde] After inject all DIMM's memory correctable error, BMC record duplicated memory CE log of previous DIMM slot channel 1 (CPU0/1 A1, C1, E1, G1) for slot CPU0/1 B0/B1, D0/D1, F0/F1, H0/H1.
    #364171 [DVT_SYS1_N1-1] BMC SEL logged PCIe correctable error during power cycle, but the extended PCIe error event [Error ID] is "ff" that unable to analyze which error type happened.
 
3A11:
 - Fix E-Track issue 
    #361147 [DVT][Insyde][CCL][SKU69] There is one more "UEFI: Hard Drive" device in BIOS Boot Option after install vmware 7.0 u1.
    #362334 [PVT][Insyde] SMBIOS Type 43 Description: TPM Device (should be vendor name) and Characteristics is wrong. (Copy from S5X #351850)
    #360192 [PVT][CCL][SKU98] NVMe M.2 (Intel SSDPELKX020T8 110mm M.2 P4511) cannot be detected.
    #356518 [DVT][SKU80]BMC WebUI can't show NVMe information when insert M.2 NVMe SSD in system and it can be recognized under OS.
    #363192 [PVT][Insyde] Memory RAS Configuration Correctable Error Threshold can setup "0", it does not match help txt "1-32767".
    #351850 [PVT][Insyde] Please help to confirm which specification document can check whether the TPM module supports the "Interface Type Selection" function.

3A10:
 - Fix E-Track issue 
    #355689 [DVT][Insyde] Response "LOM" LAN card type via IPMI OEM command, but SUT does not have "LOM" LAN card type device.
    #360420 [PVT][Insyde] There is no SEL "Correctable PCIe Error Logging Disabled - Asserted" after injecting PCIe CE error over 10 times by ITP.
    #351850 [PVT][Insyde] Please help to confirm which specification document can check whether the TPM module supports the "Interface Type Selection" function.
    #361264 [DVT][Insyde][CCL][SKU69] The X710-DA4 OCP 3.0 doesn't defined in "Worst card ID list R50.xlsx", but the actual card weight is "1.33". (Worst card)
    #358784 [PVT][Insyde][SKU109][CCL1][4287.1] The PCIe width of MCX566A-CDAB on Insyde system was downgrade to Gen4 x4. (Capability of card is Gen4 x16, and AMI system is Gen4 x8)
    #352241 [PVT] BMC logged event log "Time Expired(Timer use at expiration: BIOS FRB2) - Asserted" and black screen after DC cycle.
    #354660 [PVT]System hang up BIOS during at DC cycle 72 loops.

3A09:
 - Fix E-Track issue 
    #360038 [PVT][Insyde] SEL still record Mem CE event after injecting one Mem CE by ITP, but Mem threshold is set to 0x3.
    #357389 [DVT][SKU74] Only show three GPU information via execute REDFISH command when insert four GPU card into system and it can be recognized under OS.
    #359170 [PVT][SKU109] OS record "pcieport 0000:16:02.0: Failed to check link status" on each AC cycling test.
    #359375 [DVT][SKU80] LED can't show amber light via command with VROC.
    #359368 [PVT][SKU109] LED can't show amber light via command with VROC.
    #359324 [DVT][SKU80] PCIESSD LED can't blinking after start locate via BIOS(VROC)
    #357879 [DVT] SMBIOS Type 8/9 list should separate to S5X / S5XQ.

3A08:
 - Fix E-Track issue 
    #353265 [PVT] Change booting order failed by IPMI command.
    #359380 [HLK][S5X_Insyde][Win2019 certification] Run "USB xHCI Transfer Speed Test" failed.
    #359378 [HLK][S5X_Insyde][Win2019 certification] Run "USB3 Termination" failed.
    #358791 [HLK][S5X_Insyde][Win2019 certification] Run "usb exposed port system test" failed.(similar#357989)

3A07:
 - Fix E-Track issue 
    #354924 [PVT][Insyde] Post does not report 0xA107 MB-Board-CONFIG is not implemented after flash modified / uncorrected Board ID Bin file.
    #357998 [PVT][Insyde] System hang up and BMC SEL record IERR error log after flash BIOS 3A06 (inband script reboot system or BMC WebUI flash completed power on system.)
    #355463 [PVT][Redfish v1.9][unblock] Redfish Cancel Action function not work when POST BPS.CreateGoal then POST BPS.CancelAction.(Goal still create successful)
    #355086 [PVT][Redfish v1.9][unblock] Redfish POST CretaeMultipleNamespaces successful and status code 204 but actually unsuccessful.(After power cycle still can't get any namespaces members.)
    #357425 [DVT][Insyde][SKU110 All Flash] BIOS IIO Configuration does not match S5XQ_HW&Product_Spec_Rev_0p02 defined value.
    #357407 [DVT][Insyde][SKU110] BIOS Socket0 Configuration IOU3 (IIO PCIe Port 4) item is Hidden. But it is not hidden item.
    #357037 [DVT][Insyde] [SKU 69] OS only detect one NVME device info via nvme list when install two NVME device at rear-window.
    #357787 [PVT][Insyde]SMIBIOS Type 1 Serial Number, SKU Number, Family and Type 3 Serial Number, Asset Tag, SKU Number report <BAD INDEX>.
    #357316 Boot page card time 1-2 hours
    #358717 [HLK][S5X_Insyde][Win2019 certification] Run "Check SMBIOS Table Specific Requirements" failed.

3A06:
 - Fix E-Track issue 
    #338624 [DVT2][CCL1] The card weight of QS-3916B is 1.00 from BMC debug output, it's different with "S5X_FSC Table_R04.2_QCT_20200727.xlsx" defined.
    #349760 [PVT][All Flash][unblock]The baud rate are mismatch between BIOS setting and IPMI command.
    #354924 [PVT][Insyde] Post does not report 0xA107 MB-Board-CONFIG is not implemented after flash modified / uncorrected Board ID Bin file.
    #345766 [DVT][Redfish 1.9] PCIeFunctions URI has forty three devices can't compare device name, please clarify how can compare.(Most devices can use pci.ids for comparison)
    #345775 [DVT][Redfish 1.9] Please clarify how can i compare attribute "Component" value under /redfish/v1/Systems/{SystemsId}/Oem/Insyde/PCIeFunctions. (PCH, BMC, Slotx, CPUx)
    #349146 [PVT][Hybrid][unblock]FAN speed is too high when system is idle.
    #347997 [DVT][Insyde][Unblock] After Clear CMOS, Enforce Secure Boot should be "Disabled" as default setting. But it is "Enabled" at BIOS 2A15.
    #355086 [PVT][Redfish v1.9][unblock] Redfish POST CretaeMultipleNamespaces successful and status code 204 but actually unsuccessful.(After power cycle still can't get any namespaces members.)
    #357272 [CCL-QS D1 CPU] There is no defined for D1 stepping microcode reversion in BIOS readme file.
    #346495 [DVT][SKU15][CCL]SUT can not boot into Ubuntu 20.04 OS after install by PXE in legacy mode(5210 ION FW:D2MU805)
    #341655 [DVT][SKU15][CCL]Samsung PM983 U.2 SSD had soon back when click to remove in Windows 2019

3A05:
 - Fix E-Track issue 
    #341353 [DVT][SKU1_All Flash] [Insyde][CCL1][TPM] TPM2 module provision fail.
    #336865 [DVT][Insyde] System cannot enter TXT trusted mode and report "Error: TXT_RESET is set in ESTS register" after command "getsec64.efi -l SENTER -a".
    #353077 [PVT] BMC no logged the Clear CMOS event after clear CMOS by IPMI command.
    #353788 [PVT][Insyde] After PVT phase, Watchdog Timer Action setting should be "Hard Reset". Similar issue #329410.
    #354277 [PVT][Insyde] Watchdog Timer Timeout/Action under option "Enable Watchdog in OS" should change to "OS Watchdog Timer Timeout/Action".
    #350057 [PVT][Insyde][CCL] Broadcom QS-3916B RAID card BIOS flash "02" string at setup menu screen.
    #353045 [PVT][Insyde] After Clear CMOS by setup jumper SW2 BIT1, BMC SEL records 105 events of "CMOS/NVRAM configuration is cleared". 
    #353791 [PVT][Insyde] The Support ext RAS mode should not report BIOS code parameter. It should be supported RAS mode's name.
    #355449 [PVT][Insyde] UART Port 2 Configuration should be grey out (read only).
    #353779 [PVT][Insyde] BIOS 3A02 Correctable Error Threshold should be 5000 after PVT phase, but value is 0x1.
    #352957 [PVT][Unblocked]UEFI PXE only display "Checking media" and would not display network card info.(Legacy is PASS)
    #351176 [DVT][Redfish][unblock] SSD has "rotationspeedRPM" property, it is abnormal.

3A04:
 - Fix E-Track issue 
    #352907 [PVT][Insyde] BIOS package name "2021WW55_3A02" should correct to 2021WW02_3A02 as corrected week of 2021. Due to 1 year only has 52 weeks and release date is 2021 2nd week.
    #352704 [PVT][Insyde] After setup Console Serial Redirect to Disabled, reboot system Console Redirection resolution change to "Auto". It should keep Force 80x25.
    #351176 [DVT][Redfish][unblock] SSD has "rotationspeedRPM" property, it is abnormal.
    #348592 [PVT][Insyde]BIOS NVM Express Information Location Segment:Bus:Device.Function does not sync Linux OS Location display HEX address.
    #348514 [DVT][Insyde][unblock] Part of items "Select Item", "Change Value" and "Select Submenu" are covered up at underneath of Help Text. (2A13 passed)
    #345778 [DVT][Insyde] After Flash ME of BIOS 2A14, BMC SEL log records 5 duplicated message "Firmware Status - Direct Flash update requested by the BIOS - Asserted".
    #346195 [DVT] SOL settings(disable SOL) not match between BIOS and WebUI.
    #348509 [PVT][Insyde][Unblock] Console Redirection Setup COM0 UseGlobalSetting should be removed, it does not separate to COM0 SOL and debug serial port.
    #348570 [PVT][Insyde] S5X only support 1 port for Console Redirection, Global settings should be removed for duplicated function as COM0.
    #352685 [SDA-PVT] System can't power on normally after updating BIOS from 3A01 to 3A02
    #351850 [PVT][Insyde] Please help to confirm which specification document can check whether the TPM module supports the "Interface Type Selection" function.
    #346217 [DVT][SKU1_All Flash] [Insyde][CCL1] We can NOT install OS via PXE or boot to OS with BIOS 2A14.
    #344364 [Pre-PVT][SKU1_All Flash] [Insyde][CCL1] We can NOT install Win2019 under Legacy mode via Broadcom N425G.
    #336854 [DVT][Insyde] ServerTXTINFO. report error "ERROR : Heap memory is not allocated" and "ERROR: The DMA Protection Register on bus XXX does not match the TXT DPR."
    #336865 [DVT][Insyde] System cannot enter TXT trusted mode and report "Error: TXT_RESET is set in ESTS register" after command "getsec64.efi -l SENTER -a".
    #348808 [DVT] [Insyde] [CCL] System recorded lots of 'Hardware Error', ' ice 0000:17:00.1', 'NULL net_device' and 'pcieport 0000:16:02.0' event logs after OCP 3.0 Surprise/ Orderly Hot-Plugging (E810XXVDA2OCP3G,FW: 2.10 0x80004647 1.2839.0/ Driver: 1.1.4) 
    #348483 [S5X][DVT][All Flash][CCL1][Unblock] System recorded lots of "Hardware Error" events and "mlx5_core" related error message when hot-plug MCX562A-ACAI OCP3.0 card. (Similar to ET#345810 for Intel OCP3.0)
    #348480 [S5X][DVT][All Flash][CCL1][Unblock] BMC SEL records "PCIe Bus Correctable Error (Bus 16 / Dev 02 / Fun 00) "and "ManufacturerID:001c4c/ VID:8086h/ DID:347Ah/ E" log when hot-plug MCX562A-ACAI OCP3.0 card. (Similar to ET#345823 for Intel OCP3.0)
    #347247 [Pre-PVT][SKU5][Insyde][CCL1]BMC WebUI will record "PCI error" event after hot plug nic card .(Mellanox MCX631432AN-ADAB 25G OCP3.0)
    #345823 [Pre-PVT][CCL1][Insyde][Tiered][#7][4334.1] BMC logged "PCIe Bus Correctable Error (Bus 16/Dev 02/Fun 00)" and "ManufacturerID:001c4c/VID:8086h/DID:347Ah/ErrorID:00h Slot 08h" events after hot-plug the OCP 3.0 NIC card but didn't log NIC lost event.
    #345810 [Pre-PVT][CCL1][Insyde][Tiered][#7][4334.1] System recorded lots of "Hardware Error" events and "pcieport 0000:16:02.0: Failed to check link status" event after OCP 3.0 Hot-Plugging. (I350-T4 OCP3.0, FW: 1.63 (VRC #194128), Driver: 5.4.6 (VRC #194126
    #344414 [DVT] BMC get many "ManufacturerID" and "PCIe Bus Error" event when idle via pluging OCP card.
    #341659 [DVT][SKU15][CCL]OS show warning message about Microsoft-Windows-WHEA-Logger(EventID:17) after do Samsung PM983 U.2 hot plug test.
    #351007 [PVT][Insyde] PCH sSATA Configuration HDD name typesetting is abnormal, it has a lot of space between HDD mode name and size.
    #349170 [PVT][Insyde][Unblock] Linux SOL report DXE_ASSERT!:[H2OFormBrowserDXE] error message after press ESC+9 (F9) at BIOS menu.
    #348853 [S5X][DVT][All Flash][CCL1][Unblock] There are some yellow ban marks after installing chipset driver.(VRCID: 187239 , Similar: ET#324308 for Win2016 , AMI FW)
    #348225 [PVT][insyde][Unblock] Device manager should add F9/F10 for Setup defaults and Save function.
    #347117 [DVT][Insyde][Unblock] Screen flash garbage during enter sub options from Front Page.
    #345100 [DVT][Insyde] After setup user password, it has no pop up windows to enter password during POST that doesn't match BIOS spec 10.13 Platform Security defined "the password is prompted during POST."
    #344081 [Pre-PVT][SKU1_All Flash] [Insyde][CCL1] It will occur "PCIe Correctable Error" SEL log when hot plugging U.2 NVMe SSD.

3A03:
 - 3A03 BIOS is a transitional version. So the fixed issues list on 3A04 section.

3A02:
 - Fix E-Track issue 
    #351552 [PVT][Insyde] BIOS 3A01 Readme DCPMM Module Firmware version 2.2.0.1532 does not match Intel Kit #1001546 version 2.2.0.1534.
    #351545 [PVT][Insyde] BIOS 3A01 Readme SYSTEM FIRMWARE REQUIREMENTS/REVISIONS "VGA (embedded in AST2500)" does not match S5X HW spec defined "Nuvoton NPCM750R".
    #351020 [PVT][Insyde] Server ME Configuration "WarmResetNotificationSubFlow" typesetting is abnormal, the word should not move to next row.
    #350137 [PVT][Insyde][Unlock] There is a cursor "_" on POST screen. (Both Quiet Boot Enabled/ Disabled.)
    #343854 [DVT][Insyde] Linux SOL lost '<F12> PXE Boot' and 'Press ESC to skip' at POST screen when setup 'Quiet Boot' and Text Mode Resolution Force 80x25 enabled. 
    #348887 [PVT][Insyde][Unblock] System does not execute CMOS clear after reboot with command "ipmitool chassis bootdev none options=efiboot,clear-cmos"
    #342726 [DVT][Redfish] After execute Actions command /Actions/Oem/Quanta/Aep.CreateGoalNamespaces and reboot OS, Redfish didn't create successful. (Response http code: 204)
    #340495 [DVT2][CCL1][Insyde][Tiered][#7] The "weight_pcie" of no card condition should be "0.95", but it was "1.00" actually, it's mismatch "S5X_FSC Table_R04.2_QCT_20200727.xlsx" defined.
    #341808 [DVT2][CCL1][Insyde][Tiered][#7][4009.1] System will go to GRUB when boot from IPv4 PXE server with Legacy boot mode.
    #351726 [PVT][Insyde] Seconds of "Press ESC to skip" does not come down to zero and disappear after power on system with removed all bootable devices.
    #349791 [PVT][Tiered][unblock]BIOS Setup can not boot after set boot options is legacy mode via WebUI.(UEFI is PASS)

3A01:
 - Fix E-Track issue 
    #338624 [DVT2][CCL1] The card weight of QS-3916B is 1.00 from BMC debug output, it's different with "S5X_FSC Table_R04.2_QCT_20200727.xlsx" defined.
    #340495 [DVT2][CCL1][Insyde][Tiered][#7] The "weight_pcie" of no card condition should be "0.95", but it was "1.00" actually, it's mismatch "S5X_FSC                                              Table_R04.2_QCT_20200727.xlsx" defined.
    #347763 [DVT][Insyde][Unblock] Linux SOL still display BIOS POST information after system enter Windows 2019.
    #349146 [PVT][Hybrid][unblock]FAN speed is too high when system is idle.

2A16:
 - Fix E-Track issue 
    #346566 [DVT][Insyde] Recommend removing dot from "No Error", because this is "item" not "sentence".
    #344744 [DVT][Insyde] BIOS POST screen does not sync between Linux SOL and SUT(VGA ouput, iKVM), when Hotkey disappear at POST screen, Linux SOL still has F11, F12                           option. (Resolution is 80x25)
    #345241 [DVT] [Insyde] [CCL] There's no option about '200 Series PMem Average Power Limit (in mW) ' for setting under PMem Configuration of BIOS setup menu (AMI                                  BIOS 2A09 has)
    #346261 [DVT][Insyde] After pressing page down key under BIOS, BIOS screen cannot jump to next page directly.
    #346266 [DVT][Insyde] Press ARROW DOWN at the bottom of the BIOS menu, the viewing angle move to top of the page, but it will not be restored for all information.
    #347940 [DVT][Insyde][unblock] There is afterimage after pressing "Esc" under BIOS Main page. (2A14 passed)
    #348497 [PVT][Insyde][Unblock] BIOS main page has garbage block after press hot key "ESC" or "F9".
    #348494 [PVT][Insyde][Unblock] Linux SOL has black block diagram at BIOS main page.
    #345633 [DVT][Insyde] Flash 2A14 BIOS/ME with security boot enabled FAILED via BIOS_lnx64.sh/ ME_lnx64.sh, it reports error messgae "insmod" ERROR: could not                           insert module phy_alloc.ko: Required key not available.""
    #346182 [DVT][SKU15]Insyde BIOS 2A14 BIOS POST have black line(broken picture) when press del before boot into device.
    #347203 [DVT][Insyde][Unblock] After flash BIOS with "/SSB" command, Secure Boot Database change to "Unlocked", secure key has cleared.
    #347216 [DVT][Insyde][Unblock] After flash BIOS with "/SSB" command with Secure Boot Disabled, Enforce Secure Boot change to "Enabled"
    #347218 [DVT][Insyde][Unblock] After reboot system with Erase all Secure Boot Settings "Enabled", Secure Boot DBX Signature list is not empty.
    #347357 [DVT][Insyde][Unblock] There is one DBX option SHA256 key cannot be cleared after executing Delete Signature.
    #347748 [DVT][Insyde][Unblock] POST screen display Hot Key string til POST END. But Hot Key already cannot work before POST END.
    #347978 [DVT][Insyde][Unblock] The Memory Topology format still has a lot of space, but memory description has changed row.

2A15:
 - Fix E-Track issue 
    #346508 [DVT][Insyde] BIOS 2A14 Readme Intel processor Microcode Revision does not define HCC CPU stepping information
    #346504 [DVT][Insyde] BIOS 2A14 Readme Intel processor Microcode Revision CPU stepping information is not the same between Description and Stepping.
    #345165 [DVT][Insyde] BMC WebUI iKVM keyboard/ virtual keyboard lost function after press pause key at POST screen. Similar#342676.
    #344961 [DVT][Insyde] After press DEL or F2 to enter BIOS Front page, Linux SOL report "DXE_ASSERT!" error message.(Similar#327370)
    #343330 [DVT][Insyde][performance] Need spend about 18 seconds booting into Boot Manager and 30 seconds booting into Device Manager when inserting 1 RAID card + 3                           LAN cards into SUT under UEFI Mode.
    #339617 [DVT][Insyde] SUT spent about 20 seconds entering from Front Page to Boot Manager when connecting 2 DVD-ROMs (with bootable disc) to SUT.
    #338007 [DVT][Insyde] BIOS Main menu Total Memory size report BPS + DDR4 size at BPS App Direct mode.
    #332582 [DVT][Insyde][BPS] Total memory should show DDR4 size only when set BPS to AppDirect mode.
    #345028 [Pre-PVT][CCL1][Insyde][Tiered][#7] The HDD locate LED on bay 2 / 3 / 8 and 9 were continuous blinking after hot-plug SSD drives or SUT reboot. (BIOS 2A12                                                 passed)
    #344982 [Pre-PVT][CCL1][Insyde][Tiered][#7] The HDD LED behavior become abnormal (Amber on or Locate LED blinking) when used 2A13 BIOS firmware. (BIOS 2A12 passed)
    #341355 [DVT][Redfish] Redfish change BIOS password is not workable.
    #342676 [DVT][Insyde] USB keyboard lost function after press pause key at POST screen.
    #342941 [DVT] [Insyde] [CCL] ] The "Property Name" of CX512F/ CX4121A and CX566A OCP 3.0 card should be "PCIe" and "OCP Mezz" under SMASH. (Both UEFI and                                    Legacy mode)
    #342943 [DVT] [Insyde] [CCL] ] The "Properties" of CX512F/ CX4121A port 1 mac address information was less under SMASH
    #343509 [Pre-PVT][CCL1][Insyde][Tiered][#7][4016.1] BMC WebUI didn't show the Port2 MAC address under NIC Information page. (MCS: 4016.1 Broadcom N225P 25Gb OCP 3.0                                                         SFF)
    #343585 [Pre-PVT][SKU1_All Flash] [Insyde][CCL1] BMC WebUI NIC Info page has no MAC information even lan port connected.
    #344100 [DVT] [Insyde] [CCL] BMC WebUI doesn't display CX512F-ACAT Port2 MAC Address information under NIC Information page
    #344108 [DVT] [Insyde] [CCL] BMC WebUI doesn't display CX566A OCP 3.0 Port1/ Port2 MAC Address information under NIC Information page
    #344154 [Pre-PVT][CCL1][Insyde][Tiered][#7][4008.1] The Port2 MAC Address is "00:00:00:00:00:00" under BMC WebUI NIC Information page. (MCS: 4008.1 MELLANOX                                                         CX516A 100Gb HHHL)
    #344161 [Pre-PVT][CCL1][Insyde][Tiered][#7][2323.1] The Port4 MAC Address is "00:00:00:00:00:00" under BMC WebUI NIC Information page. (MCS: 2323.1 Intel X710-DA4                                                         10Gb HHHL)
    #344856 [DVT][Insyde] IPv6 Router Address report 0:0:0:0:0:0:0:0 which does not keep DHCP address after modify DHCP to static IPv6 IP address.
    #345250 [Pre-PVT][SKU1_All Flash] [Insyde][CCL1] The "Property Name" of Broadcom N425G OCP3.0 card should be "OCP Mezz" under SMASH. (Both UEFI and Legacy mode)
    #345254 [Pre-PVT][SKU1_All Flash] [Insyde][CCL1] The "Properties" of BCMN425G port 3 mac address information was miss under SMASH (Both UEFI and Legacy mode)
    #345845 [DVT][Insyde] Suggest to hidden IPv6 Address information when setup IPv6 Configuration to Disabled.
    #343970 [DVT][Insyde] Linux SOL POST lost BIOS version, BMC IPv4 Address, BMC IPv6 Address information when boot with Quiet boot enabled.
    #345852 [DVT][Insyde] POST screen report BMC IPv6 Address 0:0:0:0:0:0:0:0 when BIOS IPv6 Configuration is Disabled. But it should be "IPv6 Support is Disabled".
    #345807 [DVT][Insyde] BIOS need reboot system 2 times to enable Secure Boot completed.
    #345633 [DVT][Insyde] Flash 2A14 BIOS/ME with security boot enabled FAILED via BIOS_lnx64.sh/ ME_lnx64.sh, it reports error messgae "insmod" ERROR: could not                           insert module phy_alloc.ko: Required key not available.""
    #345255 [DVT][Insyde] BIOS spec defined View Only when enter Setup Utility by user password, but it does no match BIOS MM "User privilege can only update                           Date/Time/change user password."
    #345100 [DVT][Insyde] After setup user password, it has no pop up windows to enter password during POST that doesn't match BIOS spec 10.13 Platform Security defined                           "the password is prompted during POST."
    #345097 [DVT][Insyde] After using user password to Enter Setup Utility, Security page has disappear which does not match BIOS spec chapter 10.13 Platform Security                           defined "View Only:Access to Setup Utility allowed but the fields cannot be changed."
    #345069 [DVT][Insyde] At Linux SOL resolution 80x25, some BIOS options title and value is only separated by one space, the space is too close that user may confused                           value as part of the title, suggest add more 2 space between option title and value.

2A14:
 - Fix E-Track issue 
    #342819 [DVT][Insyde] BMC record sel log "DIMM initialization warning" w/ no Memory DIMM installed. It should record "No memory is physically installed in the                           system" only.
    #338316 [DVT][Insyde] SEL still recorded log of DIMM Slot A Channel 0 after injecting Memory CE on DIMM Slot A Channel 1 by ITP. (BIOS: 2A03/ BMC: 2.02.01 passed)
    #343722 [DVT][Insyde] There is no SEL "Software NMI" after triggering PCIe Bus Fatal error by ITP.
    #343384 [DVT][Insyde] H2OUVE cannot edit BIOS Boot Device Type Order settings.
    #344260 [DVT][Insyde][BPS] Memory Topology does not report physical size for Intel BPS DIMM. (BPS DIMM 512GB should be 507GB.)
    #343854 [DVT][Insyde] Linux SOL lost '<F12> PXE Boot' and 'Press ESC to skip' at POST screen when setup 'Quiet Boot' and Text Mode Resolution Force 80x25 enabled.
    #343355 [DVT][Insyde] For Linux SOL,"<F2>, <DEL> Front Page" is disappear at POST screen after setup Force 80x25 at Text mode Resolution.
    #343348 [DVT][Insyde] After pressing <ESC> at POST screen , but no prompt message for users. Suggest add "Booting..." after press "ESC" key during POST.
    #343155 [DVT][Insyde] Suggest Text Mode Resolution change to 80x25 or SOL window is abnormal.
    #343086 [DVT][Insyde] After setup Text Mode Resolution to "80x25, 80x24", POST screen is abnormal.
    #340030 [DVT][Insyde] Default setting of item "Hot Plug" under PCH SATA Configuration suppose to be "Enabled" because HSBP support hot-plug function.
    #344002 [DVT][Insyde] Linux SOL report error message "ERROR: C2:V1050007 I0 0D275172-10C6-4D8C-8B2C-6610E69E303 511B9060" during POST.
    #343377 [DVT][Insyde] After command #ipmitool chassis bootdev bios and reboot system, system go to BIOS Setup Utility page directly. And it cannot go back to Front                           Page by press Esc Key.
    #343335 [DVT][Insyde] There are some wording of items that need to be revised as upper case under BMC Configuration.
    #340242 [DVT][SKU15]BIOS can not see S4510 disk in boot device when connect with 3816 in legacy mode.
    #341702 [DVT][Insyde][CCL] BIOS HDD Security report "Unknow" port type for Samsung MZQLB3T8HALS-00007 (FW: EDA5402Q).
    #341866 [PVT][Insyde][SGX] After enable Intel SGX, system report POST error 0xA2FF DIMM initialization fail.(BIOS 2A07 PASS)
    #341928 [DVT][SKU1_All Flash] [Insyde][CCL1][BPS] It needs two "save" operation to change "volatile memory mode" successfully.
    #342751 [DVT][Insyde][CCL1] NVME Express Information report Samsung PM983 2.5" 3.84TB MZ-QLB3T80 Serial Number at Model Number. (FW: EDA5402Q)
    #342971 [DVT][Insyde] POST has no HDD passoword security page pop up and BIOS Storage Password Setup Page disappear after Set All HDD Password with Samsung                           MZQLB3T8HALS-00007 (FW: EDA5402Q) installed
    #343051 [DVT][Insyde] Press F12 to PXE boot during POST, system screen will stay at front page after exiting PXE boot automatically. But it should go to next boot                           device.
    #343064 [DVT][Insyde] After exiting (Press F12) PXE boot automatically, system go to stay Front Page. Click "Continue", system will go to PXE server again. It                           cause a forever loop between PXE and front page.
    #343947 [DVT][Insyde] Please remove colon ":" from each items of BIOS pages.
    #339514 [DVT][SKU9] [Insyde][CCL1]PCIESSD LED(slot 0/1) can't blinking after start locate via BIOS(VROC).
    #332566 [DVT][Insyde] FFT tool cannot get AC-Plug info when execute the script for BIOS updating.
    #343711 [DVT][Insyde] When Flash ME on OS by H2OFFT, it does not report ME current version and new version.
    
2A13:
 - Fix E-Track issue 
    #342964 [DVT][Insyde] SATA EFI shell OS HDD should report (SPX: HDD Vender Model) under Boot Manager.
    #342966 [DVT][Insyde] NVME EFI Hard Drive should report (SlotXX-1 NVME HDD information) under Boot Manager.
    #343212 [DVT][Insyde] When SUT occur two POST errors => no FP FRU/ Legacy no space, POST only appear "no FP FRU" error under Legacy Mode. (SEL has both two POST                           error logs)
    #342484 [DVT][Insyde] OS hang after executing H2OUVE command "h2ouve-lx64 -ms -fi "Set Supervisor Password" -op "" "123". (H2OUVE version: 200.01.00.10)
    #342751 [DVT][Insyde][CCL1] NVME Express Information report Samsung PM983 2.5" 3.84TB MZ-QLB3T80 Serial Number at Model Number. (FW: EDA5402Q)
    #341396 [DVT][Insyde] Recommend removing blank line at beginning of some pages under Boot Manager and Setup Utility. (please refer to attachments for detail)
    #341316 [DVT][Insyde] BIOS IPMI Configuration Address source change IPv6 DHCP to Static, IPv6 Static IP/Router Address should record DHCP IPv6 IP as default value.
    #341355 [DVT][Redfish] Redfish change BIOS password is not workable.
    #342876 [DVT][Insyde] After input IPv6 Static IP 2020::2020, BIOS POST report BMC IPv6 address 0:0:0:0:0:0:0:0. It does not sync BIOS BMC configuration and BMC                           WebUI IPv6 address.
    #342920 [DVT][Insyde] For BMC items under IPMI Configuration need to be at top of page then appended BMC FW Version and MAC Address.
    #341811 [DVT][SKU15][CCL]SUT can not boot into BIOS and BMC sel log show caterr after AC cycle 2 times.
    #341598 [DVT][Insyde] There is no Insyde logo under POST (Quiet Boot: Enabled) when pressing "Tab" button.
    #340337 [DVT][Insyde] The reserved memory size shown by "memtest86" tool is over 1GB; It should be lower than 1GB. (AMI pass)
    #339912 [DVT][Insyde] Default setting of item "Load EFI Driver for RAID" is "Disabled" and hidden item; It is not quite convenient when using S/W RAID function.
    #332829 [DVT][Insyde][BPS] The recommend memory mode ratio info is behind the pop-up message when build BPS memory mode.
    #338007 [DVT][Insyde] BIOS Main menu Total Memory size report BPS + DDR4 size at BPS App Direct mode.
    #332582 [DVT][Insyde][BPS] Total memory should show DDR4 size only when set BPS to AppDirect mode.

2A12:
 - Fix E-Track issue 
    #340651 [DVT] Could not boot to UEFI PXE via network order in BIOS when setting UEFI/PXE boot in boot page.
    #339619 [DVT][Insyde] The model name of DVD-ROM "ASUS SDRW-08D2S-U" is abnormal => should not have such much spaces. (If connect to AMI BIOS, didn't occur.)
    #339618 [DVT][Insyde] Please number naming of USB devices (include CD/DVD-ROM) under Setup Utility\ Boot and Front Page\ Boot Manager to begin like "EFI USB Device                           #1, EFI USB Device #2, ...etc".
    #338790 [DVT][Hybrid]BIOS doesn't report "0xA104: COMS/NVRAM configuration cleared" at POST after removed battery from MB.
    #327760 [DVT][Insyde][BIOS] Add help text for device-USB/HDD/Network/DVDROM/Others for user that can reference.
    #332895 [DVT][Insyde][BPS] Fail to delete namespace via BIOS.(Pass via ipmctl under EFI SHELL)
    #339088 [DVT][Insyde] There is no SEL "Error-No system memory is physically installed in the system - Asserted" when powering on SUT without any DIMMs.
    #341814 [DVT][Insyde] Help string of "Leaky bucket hight bit" is decimal, but input setting of this function is hexadecimal.
    #341580 [DVT][SKU1_All Flash] [Insyde][CCL1][BPS] Insyde BIOS "README" file has no Intel DCPMM package KIT number.
    #341376 [DVT][Insyde] Suggest Change BIOS setting name "Exit Saving Changes" to "Exit Saving and Reset".
    #341323 [DVT][SKU1_All Flash] [Insyde][CCL1][TPM] Inside BIOS REAME has no version information (NT or NPW or PW) for BIOS/SINIT ACM.
    #341322 [DVT][Insyde] Suggest BIOS setting SIO NPCM7XXX change name to "SIO Configuration".
    #341320 [DVT][Insyde] Recommend removing wording "H2O" from some begin of items under Setup Utility for avoiding user confusion.
    #341319 [DVT][Insyde] Suggest "NPCM7XXX" change name to "NPCM750" which match HW spec defined.
    #340301 [DVT][Insyde] QCT_Whitley_BIOS_Specification_InsydeVersion_0.9 defined does not support ACPI EINJ table, but support Error Injection (EINJ) Table.
    #339936 [DVT][Insyde] ACPI table Creator ID "ACPI" must change to "INTL".
    #339751 [DVT][Insyde] There is abnormal string appeared after capacity of each disks under PCH (s)SATA Configuration.
    #338624 [DVT2][CCL1] The card weight of QS-3916B is 1.00 from BMC debug output, it's different with "S5X_FSC Table_R04.2_QCT_20200727.xlsx" defined.
    #340496 [DVT][SKU1_All Flash] [Insyde][CCL1][WOL] Because PME is disable, WOL/WO PME can NOT work.
    #335106 [DVT][Insyde] SUT cannot enter PXE menu and go back to BIOS Setup after selecting HTTP IPv6 to connect to PXE server. (AMI BIOS 2A05 is pass)
    #334824 [DVT][Insyde] SUT go to GRUB after selecting HTTP IPv4 of N210P LAN card before entering PXE menu. (AMI BIOS 2A05 is pass)
    #329669 [DVT][Insyde] Correct the wording for "PCIE" under PCI Express Root Port page in Setup Utility and SPEC.
    #341703 [DVT][Insyde][CCL] System report 1st HDD Lock only after Set All HDD Password with Samsung MZQLB3T8HALS-00007 (FW: EDA5402Q). PASS with removed Samsung NVME                                SSD.
    #340165 [DVT][Insyde] Please discuss whether need to be added warning message in some of items under Advanced page or not. (For more details, please refer to                           attachment.)
    #339478 [DVT][Insyde] Recommend revising "InsydeH2O Version" to "BIOS Version" and "Release Date" to "Build Date" under Setup Utility to be consistent with                           Release Note.
    #338745 [DVT][Insyde][BPS] System report POST error: 0xA3FF DIMM configuration problem. (Socket7 Channel7 DIMM3) which does not match                                QCT_Whitley_BIOS_Specification_for_Insyde_0.9_20200903 defined.
    #339393 [DVT][Redfish] Please clarify attribute "Segment" and "SubSystem" behavior, because always display "00" and "null" under /redfish/v1/Systems/                           {SystemsID}/Oem/Insyde/PCIeFunctions.

    #338007 [DVT][Insyde] BIOS Main menu Total Memory size report BPS + DDR4 size at BPS App Direct mode.
    #332582 [DVT][Insyde][BPS] Total memory should show DDR4 size only when set BPS to AppDirect mode.
    #330243 [DVT][Insyde] After injecting Memory Correctable/ Uncorrectable/MCERR Error by ITP then reboot SUT, SEL recorded PCIe error logs
    #340569 [DVT][All Flash]BMC recored "System Firmwares POST Error | Unknown Error | Asserted" during warmboot cycle
    #333246 [DVT][SKU13]After reboot the system, BMC would record the event "Redfish HTTP transportation failed".
    #341276 [DVT][SKU9-MB 2nd source][Insyde][CCL1] FSC about MCX556A-EDAT weigh should display 2.20(type3 special card ) not 1.3.
    #340102 [DVT][Insyde] BIOS setting Energy Pert BIAS > Power Performance Tuning option lost OS controls EPB. Load optimal defaults after select BIOS Controls EPB /                           PECI Controls EPB, setting cannot turn back to "OS controls EPB."

    #340566 [DVT] BMC record "Redfish HTTP transportation failed" event during DC cycling.
    #340495 [DVT2][CCL1][Insyde][Tiered][#7] The "weight_pcie" of no card condition should be "0.95", but it was "1.00" actually, it's mismatch "S5X_FSC                                              Table_R04.2_QCT_20200727.xlsx" defined.

    #337747 [DVT][SKU1_All Flash] [Insyde][CCL1][BPS] It will spend 11 to 15 minutes for one time DC power cycle when SUT with 8 pieces of 128G RDIMM + 8 pieces of                                                       Intel 512G BPS P-Mem. (Population Config 3: 4+4 sku)
    #329758 [DVT][Insyde][Performance] The arrow key move speed of Front Page interface and BIOS Setup Utility interface is difference.
    #332895 [DVT][Insyde][BPS] Fail to delete namespace via BIOS.(Pass via ipmctl under EFI SHELL)
    #322043 [S5X][EVT2][Insyde][BIOS_ITP] Can NOT trigger DMI Correctable Error. (Fail: PCIe injectors are disabled in errinjcon; can't override this - need BIOS to not                                           set this bit)
    #330844 [DVT][Insyde] Default setting for "CPU C6 report" should be "Auto" which follow QCT's setting.
    #330837 [DVT][Insyde] Default setting for "Package C State" should be "Auto" which follow QCT's setting.
    #337121 [DVT][SKU1] The SOL settings does not match between WEBUI and BIOS setup page.
    #328376 [DVT][Redfish] [DVT][Redfish] The BIOS settings value will display a space after GET /redfish/v1/Systems/[System ID]/Bios/Settings via redfish.
    #331933 [DVT][SKU13]The Firmware Revision of SATA in storage page is incorrect.

2A11:
 - Fix E-Track issue 
    #338812 [DVT][SKU1_All Flash] [Insyde][CCL1][Boot Menu] The title of Intel XL710-DA2 40G in Boot Manager is not the same as others.
    #339279 [DVT] [AllFlash]BMC recored "POST Error,FP FRU - PD Custom Field 1 not implement " event after system " Reset Host" via WebUI
    #339240 [DVT2][CCL1][Insyde][Tiered][#7] BIOS POST display "0xA109: FP FRU - PD Custom Field 1 not implement" message. (BIOS 2A09 / BMC 2.08.00 passed)
    #338184 [DVT][SKU13]BMC firmware version shows different between BIOS page and BMC release note.
    #337842 [DVT][SKU13]When system is idle, BMC would record the event "ComponentWatcher - Hdd changed - Asserted".
    #337133 [DVT][SKU5]BMC record "ComponentWatcher, Hdd changed - Asserted " during system idle
    #337130 [DVT][SKU13]BMC record the SEL "Unknown ComponentWatcher | | Asserted" during AC cycling test.
    #337121 [DVT][SKU1] The SOL settings does not match between WEBUI and BIOS setup page.
    #339750 [DVT][Insyde] ERST in ACPI table doesn't become "NOT Found" status after disabling "WHEA Support".
    #335106 [DVT][Insyde] SUT cannot enter PXE menu and go back to BIOS Setup after selecting HTTP IPv6 to connect to PXE server. (AMI BIOS 2A05 is pass)
    #334830 [DVT][Insyde] Port0 of N210P LAN card disappear after entering into PXE IPv6 to PXE menu and exiting back to BIOS. (AMI BIOS 2A05 is pass)
    #334824 [DVT][Insyde] SUT go to GRUB after selecting HTTP IPv4 of N210P LAN card before entering PXE menu. (AMI BIOS 2A05 is pass)
    #339891 [DVT2][CCL1][Insyde][Tiered][#7][4008.1] The NIC options will increase/disappear after press "HTTP IPv4/IPv6" boot option and exit from GRUB.
    #339924 [DVT][Insyde] There are 2 ACPI SSDT table report Revision "1" which does not match ACPI spec 6.2 defined Revision is "2".
    #339092 [DVT][Insyde] BIOS Readme(Release note) did not incude notice user change items about use FFT tool to update BIOS.(BIOS 2A10)
    #338624 [DVT2][CCL1] The card weight of QS-3916B is 1.00 from BMC debug output, it's different with "S5X_FSC Table_R04.2_QCT_20200727.xlsx" defined.
    #335944 [DVT][Insyde] Please discuss adding Insyde brand logo at POST(Quiet Boot: Disabled) as AMI design.
    #335911 [DVT][Insyde] Please discuss adding the copyright information at POST(Quiet Boot: Disabled) and Setup Utility page. (AMI has this information)
    #339084 [DVT][Insyde][BPS]After set up APP direct mode, Intel Optane Persistent Memory Configuration report "There are no PMem Modules detected in the system",                               Total Memory size reduce to 4094GB (9TB installed) but Memory Topology detect all memory.
    #338790 [DVT][Hybrid]BIOS doesn't report "0xA104: COMS/NVRAM configuration cleared" at POST after removed battery from MB.
    #337936 [DVT][Insyde] BIOS main page need to add "Usable Memory" to report logical memory size.
    #337288 [DVT][Insyde] BIOS menu Total memory reduce to half size after enable Full Mirror mode.
    #329758 [DVT][Insyde][Performance] The arrow key move speed of Front Page interface and BIOS Setup Utility interface is difference.
    #331677 [DVT][Insyde] After create Intel VROC RAID0, RAID Volumes display garbage word.
    #337353 [DVT][Insyde] At legacy mode, Boot manager cannot detect NVME SSD (512B format) with RHEL 8.2 OS installed.(SAMSUNG MZQLB3T8HALS-00007)
    #338745 [DVT][Insyde][BPS] System report POST error: 0xA3FF DIMM configuration problem. (Socket7 Channel7 DIMM3) which does not match                                QCT_Whitley_BIOS_Specification_for_Insyde_0.9_20200903 defined.
    #339478 [DVT][Insyde] Recommand revising "InsydeH2O Version" to "BIOS Version" and "Release Date" to "Build Date" under Setup Utility to be consistent with                           Release Note.
    #339503 [DVT][SKU9] [Insyde][CCL1]The CPU naming of VROC OpROM should be "CPU1" not "CPU2".
    #339520 [DVT][Insyde] Recommand revising "PCH Reversion" to "PCH Revision" (or Version) and "Acm Version" to "ACM Version" under Advanced\ Platform                           Information.
    #339620 [DVT][Insyde] Please revise some wordings in Diagnostic Screen; Please refer to "Diag_Screen_wording.jpg" for details.

2A10:
 - Fix E-Track issue 
    #336986 [DVT][Insyde] System hang up with black screen during install Windows 2019 at legacy mode.
    #335441 [DVT][Insyde] SEL should not record lots of "Hard PPR Fail Socket 00 Channel 00 DIMM" after injecting Memory CE by ITP. (BIOS: 2A03/ BMC: 2.02.01 passed)
    #335106 [DVT][Insyde] SUT cannot enter PXE menu and go back to BIOS Setup after selecting HTTP IPv6 to connect to PXE server. (AMI BIOS 2A05 is pass)
    #334830 [DVT][Insyde] Port0 of N210P LAN card disappear after entering into PXE IPv6 to PXE menu and exiting back to BIOS. (AMI BIOS 2A05 is pass)
    #330713 [DVT][Insyde] Add comments for why [OS Controls EPB] will be hidden.(refer below for detail info)
    #337340 [DVT][SKU1_All Flash] [Insyde][CCL1][BPS] The capacity of Intel P-MEM BPS 512G in BIOS Setup Utility is wrong. (BIOS shows 507G)
    #336461 [DVT] [Insyde][CCL] System could not power on after installing 16 pcs DIMMs 'SK Hynix, HMAA4GR7AJR8N-X (32G)', and BMC recorded 'ManufacturerID:001c4c/ MRC:                                 Major Code:0130h Minor Code:FF04h (CPU3_H7)' (2P 2D is Passed)
    #338184 [DVT][SKU13]BMC firmware version shows different between BIOS page and BMC release note.
    #338037 [DVT][AllFlash]System GUID doesn't match between IPMI command and SMBIOS
    #338029 [DVT][AllFlash]System GUID doesn't match between IPMI command and Legacy boot mode PXE post screen
    #336706 [S5X][Insyde] After clear all M/B FRU data, AC off / AC on SUT, BIOS POST does not report 0xA106 BMC Failed (Self Test Fail) which does not match                           QCT_Whitley_BIOS_Specification_for_Insyde_0.9_20200903 defined.
    #334521 [DVT][Redfish] Redfish URI PCIeFunctions mismatch with lspcie, please clarify what kind of device will be displayed on Redfish.
    #331933 [DVT][SKU13]The Firmware Revision of SATA in storage page is incorrect.

2A09:
 - Fix E-Track issue 
    #335460 [DVT][Insyde] SEL of Memory CE cannot be triggered after injecting "ei.injectMemError()" by ITP. (BIOS: 2A03/ BMC: 2.02.01 passed)
    #329472 [DVT][Insyde] The pop-up message define the max value for "User ID" is [0], but the default setting shows [1] which not match the message's definition.
    #329479 [DVT][Insyde] Need to define the correct range in help text for "User ID".
    #329488 [DVT][Insyde] Base on the pop-up message, "User ID" can input [0] but the value will not change after click Yes.
    #329494 DVT][Insyde] Please add the help text for User Status.
    #329502 [DVT][Insyde] Please add the help text and password rule for User Password under User Configuration page.
    #334752 [DVT][SKU3]BMC IP Address in BIOS setup page doesn't match with WebUI display with Shared NIC
    #334629 [DVT][Insyde] The naming "Device Manager" under Device Management should be "Device Management".
    #334509 [DVT][Insyde] BIOS POST screen does not report DIMM configuration problem error after boot system with removed Memory Channel 0 DIMM. (CPU0/1_A0, B0...)
    #328827 [DVT][Insyde] System display black screen and Caps Lock/ Num Lock LED has no response for long time after command reset -w under EFI shell.
    #334518 [DVT][Insyde] System cannot boot success and report black screen after power on SUT with remove 1 channel 0 memory DIMM (CPU_A0, B0...)
    #331601 [DVT][Insyde] ME update fail randomly.
    #331414 [DVT][Insyde][Performance] BIOS menu display black screen about 1 mins to enter Setup Utility after Exit Discarding Changes at Administer Secure Boot                   PK/KEK/DB/DBX options.
    #329928 [DVT][Insyde] ME Current State show Operational even when ME version shows N/A in Setup Utility.
    #329916 [DVT][Insyde] ME version shows N/A in Setup Utility.
    #335744 [DVT][Insyde] Windows 2019 BSOD after boot to system with SGX enabled. (BIOS 2A06 PASS)
    #332913 [DVT][Insyde] Windows Flash BIOS FAIL with Intel SGX enabled, system report "Error: Decompress failed!!!"
    #333246 [DVT][SKU13]After reboot the system, BMC would record the event "Redfish HTTP transportation failed".
    #333239 [DVT][SKU1] The BMC logged the SEL event "System Firmwares #0x8d | Unknown Error | Asserted" during AC cycling.
    #329485 [DVT][Insyde] "User ID" only can set to [0] which not match SPEC's definition.

2A08:
- Fix E-Track issue 
    #335367 [DVT][SKU1] The SUT hangs at POST when running the AC cycle test.
2A07:
- Fix E-Track issue 
    #333184 [DVT][SKU3]BMC record event "Power Supply / Converter , Presence Detected - Asserted\ Deasserted "during FRU read/write stress
    #332759 [DVT][SKU1] There are some same PSU SEL events between BMC SEL and BIOS SEL.
    #332748 [DVT][SKU1] The BMC recorded some PSU SEL events from the ME controller, but these events should come from the BMC controller.
    #331375 [DVT][Insyde] Correct the item name in SPEC for "UBOX to PCU MCA Enabling".
    #330523 [DVT][Insyde] Based on the help text, the value of "PL1 Time Windows" may vary from 0 to 56 only.
    #332962 [DVT][Insyde] POST don't appear "no bootable device" when SUT aren't connected any bootable devices with Quiet Boot - Disabled. (Please help define rule                           in Spec)
    #330487 [DVT][Insyde] At legacy mode, POST display black screen and lost QCT log / boot option string (F2, DEL, F11, F12) after NIC Option ROM display completed.
    #333326 [DVT][Insyde] Select Owner EPOCH activated > Manual User Defined Owner EPOCHs > Software Guard Extensions Epoch 0/1 is Hidden.
    #334452 [DVT][Insyde] The naming "BIOS Revision" under POST should be lower case "BIOS revision".
    #334437 [DVT][Insyde] There is no status for each EFI drivers under BIOS\ Device Management\ Driver Health Manager. 
    #333290 [DVT][Insyde] Memory test will not be skipped by pressing "Del" button then need to wait until it completed after disabling "Quick Boot". 
    #332574 [DVT][Insyde] FFT tool version not same between execute fft in OS and the updating progress.
    #332461 [DVT][Insyde] Setup Utility will not show CPUID and stepping info in Main page which not same the SPEC's definition.
    #332379 [DVT][Insyde] Do not reboot the SUT if flash BIOS via fft tool with invalid BIOS file.
    #332112 [DVT][Insyde] BIOS iSCSI Initiator Name cannot delete name to empty. BIOS report warring message "Please enter enough characters".
    #331590 [DVT][Insyde] SUT will auto reboot after execute BIOS/ME update script.(not starting flash yet)
    #334621 [DVT][Insyde] Please consider appending more descriptions for Help Text of Driver Health Manager. (not just only "Healthy.")

2A06:
- Fix E-Track issue 
    #329094 [DVT][Insyde] If injecting "ei.injectMemError(xxx)" on CPU0_A0, A1,~to D1 slots in order, last events for D1 will record duplicate SEL "A1,B1,C1,D1".                              (it should only record D1 SEL)
    #328886 [DVT][Insyde] There are two duplicate SELs "Correctable ECC (CPU0_A0_Bank0) - Asserted" after injecting Memory Correctable Error by ITP. (Should be only                           once time)
    #330991 [DVT][Insyde] SEL logs aren't be consistent with the slots which are injected Memory C/A Parity Error from CPU1_A0~CPU1_H0 by ITP. (CPU0_A0~CPU0_H0 is pass)
    #327768 [DVT][Redfish] The content of PartNumber value has some spaces after GET /redfish/v1/Systems/<SYSTEM ID>/Memory/Dimm1 via redfish.
    #328043 [DVT][Redfish] The AssetTag value of oem attribute has a spaces after GET /redfish/v1/Systems/<SYSTEM ID>/Memory/<Memory ID> via redfish.
    #330498 [DVT][Insyde] The default value not match the description in help text for "Select Temperature Refresh Value".
    #330809 [DVT][Insyde] Memory speed report 2933MT/s does not match ICX-SP memory support when insert Micron MTA9ASF2G72PZ-3G2E1UI x32 full DIMM.
    #331099 [DVT][Insyde] BIOS Device Manager detect incorrect NVME SSD HDD quantity.
    #331237 [DVT][Insyde] Under EFI shell OS, it cannot read board after command "dmpstore -all BoardIdVolatileData -b" 
    #332029 [DVT][Insyde] Hybrid SKU Socket0 Configuration IOU1 and IOU4 PCIe Port settings does not follow HW spec PCIe Bus routing defined.
    #331235 [DVT][Insyde] BIOS Uncore Per Socket Configuration CPU0/CPU1 Help description for Silk screen (CPU0 > CPU1, CPU1 > CPU2) is wrong. 
    #330789 [DVT][Insyde] Describe which setting will cause the related items become grey out in Socket RAPL Config page.
    #330724 [DVT][Insyde] Describe which setting will cause "PECI PCS EPB" and "ENERGY_PERF_BIAS_CFG mode" become grey out item.
    #330713 [DVT][Insyde] Add comments for why [OS Controls EPB] will be hidden.(refer below for detail info)
    #330305 [DVT][Insyde][BIOS] BIOS Boot item name "Acpi" should be "ACPI"(uppercase).
    #329963 [DVT][Insyde] Modify the word to "PCIE" under PCI Express Configuration page/PCIE Clock Gating in Setup Utility and SPEC.
    #329962 [DVT][Insyde] Correct the wording for "PCIE" under PCH Device page/Pcie Pll SSC in Setup Utility and SPEC.
    #329863 [DVT][Insyde] It cannot enable/disable Delayed Authentication Mode(DAM)/Delayed Authentication Mode(DAM) Override which not match with SPEC.
    #329861 [DVT][Insyde] Fail to modify the setting of "WATCHDOG_CONTROL_Message" which is grey out item and not follow SPEC.
    #329838 [DVT][Insyde] Please modify the SPEC to meet the current behavior for HEX/DEC format.ex:"Cores to Disable" cannot set the value over 80 because it's hex                           format in BIOS.
    #329669 [DVT][Insyde] Correct the wording for "PCIE" under PCI Express Root Port page in Setup Utility and SPEC.
    #328899 [DVT][Insyde][BIOS] "PCI" should be uppercase for Pcie PII SSC item.
    #328863 [DVT][Insyde][BIOS] The item name "Pch Configuration" should be "PCH"(uppercase).
    #328442 [DVT][Insyde] Some of items don't be upper cases for all characters. (Ex: Whea should be "WHEA", Mca should be "MCA")
    #328537 [DVT][Insyde][BIOS] Lack TPM related info after set "TPM Availability" to "Hidden" then "Available".
    #328535 [DVT][Insyde][BIOS] TPM device name will change after set "TPM Availability" to "Hidden".
    #328519 [DVT][Insyde][BIOS] BIOS Support Hash Algorithm not list SHA384 when TPM installed which support SHA384.
    #332040 [DVT][Insyde] BIOS Setup Utility cannot modify the setting of "RAPL Prioritization" which is grey out item and not match with SPEC .
    #332122 [DVT][Insyde] Lost some Sensor Reading in the list in Setup Utility(ex: ID#001).
    #331531 [DVT][Insyde] IPv4 and IPv6 IP Address display default static IP after select Lan Port Configuration Dedicated > Shared > Dedicated. But it should report                           DHCP IP Address because user does not save change and exit.
    #331505 [DVT][Insyde] After select Lan Port Configuration from Dedicated to Shared, iKVM disconnect at the same time.
    #331491 [DVT][Insyde] Select IPv6 Soure DHCP/SLAAC > Static > DHCP/SLAAC, Dynamic IP Address report default Static IP, but it should display DHCP IP again because                           user does not save and exit.
    #331451 [DVT][Insyde] Select IPv4 Source to DHCP > Static > DHCP, IPv4 IP address still keep Static default IP address, but it should display DHCP IP again because                           user does not save change exit.
    #331419 [DVT][Insyde] BMC Configuration IPv6 Source option "DHCPv6/SLAAC" does not match help description "DHCP".
    #329607 [DVT][Insyde] Modify IPv4 Source to Static will take effect immediately without press F10.
    #332425 [DVT][Insyde] Suggest to modify the string to "Dedicated-NIC" for Lan Port Configuration options.
    #332426 [DVT][Insyde] Suggest to modify the string to "Shared-NIC" for Lan Port Configuration options.
    #327648 [DVT][Insyde][BIOS] Need to define the option "Auto" for "Add Boot Options" item.(Auto=First?)
    #327652 [DVT][Insyde][BIOS] The sequence of boot options will be changed after set "Add Boot Options" to "Last" then "Auto".
    #328187 [DVT][Insyde] The SOL screen not renew after press F2/DEL/F11/F12 during POST.
    #330450 [DVT][Insyde] Remove "Legacy" description in help text if BIOS options not support it.
    #330455 [DVT][Insyde] BIOS options of PXE Boot capability not support "UEFI PXE" option.
    #330458 [DVT][Insyde] BIOS options of PXE Boot capability("UEFI","HTTP","HTTP and PXE") not define in help text.
    #331441 [DVT][Insyde] Boot Manager Hard Disk Drive should remove sSATA port information.
    #330465 [DVT][Insyde] Based on the current supported items to list the support list in the help text for Network Stack.
    #332762 [DVT][Insyde][performance] When flash BIOS, sometimes the memory test will take long time and sometimes it test sooner.
    #332698 [DVT][Insyde] The region info in BIOS update progress is incorrect.
    #332566 [DVT][Insyde] FFT tool cannot get AC-Plug info when execute the script for BIOS updating.
    #332427 [DVT][Insyde] No "Intel(R) Optane(TM) Persistent Memory Configuration" page for BPS configuration setting.
    #332396 [DVT][Insyde] Some of memory showed "Mapping Out" under Memory Topology if inserting DIMMs only from CPU0_A0 to CPU0_D1 (Qty 8); It will not be observed                           when inserting Qty 16 of DIMMs on CPU0. (BIOS is default setting)
    #332373 [DVT][Insyde] Failed to skip the perform memory test by DEL key when flash BIOS.
    #332218 [DVT][Insyde] iSCSI Configuration does not report notice message window when press F9 / F10.
    #332210 [DVT][Insyde] Emulation Configuration does not report notice message window when press F9 / F10.
    #332136 [DVT][Insyde] Remove hot key info "[ctrl-F1]: Switch User Level" from help dialog in Setup Utility.
    #331935 [DVT][SKU13]The SerialNumber of SATA in storage page is incorrect.
    #331827 [DVT][Insyde] BIOS display abnormal(keep a part of message) after set the value for "200 Series PMem Average Power Limit (in mW) Adjust" and the warning                           message appears.
    #331596 [DVT][Insyde] SUT will auto reboot after ME update completed which not match the behavior define in README.TXT.
    #331595 [DVT][Insyde] SUT will auto reboot after BIOS update completed which not match the behavior define in README.TXT.
    #331579 [DVT][Insyde] Do not pack the CRB Release Notes and Released_BIOS_Source_Code related files in BIOS package.
    #331422 [DVT][Insyde] Remove *.ROM file from BIOS package due to not support recovery function on Whitley.
    #331421 [DVT][Insyde] Do not pack the unnecessary files in BIOS package.
    #329495 [DVT][SKU1] There is an unknown MAC "b0:3a:f6:1a:d7:8a" in the OS.
    #327925 [DVT][SKU1] The BMC logged some SEL event related sensor "#0x66" after AC off/on the system.
    #326386 [DVT][Insyde] BIOS and QCT_Whitley_BIOS_Specification_for_Insyde_0.5 need to remove unsupport Memory Frequency.
    #326304 [DVT][Insyde] Some pages of BIOS Setting don't have blue line to distinguish "Settings" and "Help text".
    #328903 [DVT][Insyde][BIOS] The sequence of BIOS items in Advanced page not sync between Setup Utility and WebUI.
    #328782 [DVT][Insyde][BIOS] System Date/Time cannot be set in WebUI.
    #328428 [DVT][Insyde][BIOS] WebUI show the less info for TPM which not match BIOS Setup Utility.
    #328427 [DVT][Insyde][BIOS] "TPM State" not show the complete information in WebUI.
    #328426 [DVT][Insyde][BIOS] "Current TPM Device" show empty in WebUI with TPM installed.
    #328386 [DVT][Insyde][BIOS] CD/DVD-ROM Drive should not list in WebUI without device installed.
    #328250 [DVT][Insyde][BIOS] Set "Group Boot Options" to "Non-Grouped", the sequence of boot devices not same in WebUI and BIOS.
    #328189 [DVT][Insyde][BIOS] The sequence of Network devices in WebUI not follow BIOS's setting.
    #328188 [DVT][Insyde][BIOS] The sequence of Boot Device Type Order in WebUI not follow BIOS's setting.
    #328175 [DVT][Insyde][BIOS] WebUI cannot change the sequence for boot devices.
    #328119 [DVT][Insyde][BIOS] WebUI cannot set HDD password which not sync with Setup Utility.
    #328113 [DVT][Insyde][BIOS] WebUI cannot import/delete TLS certificate(no options).
    #327813 [DVT][Insyde] The item of "Storage Password Setup page" is gone in WebUI after set Boot Type to UEFI Boot Type.
    #327806 [DVT][Insyde] For the Storage Password Setup, WebUI should only show the Current BlockSID Status.
    #327727 [DVT][Insyde][BIOS] "Power on Password" should not be allowed to modify the setting without supervisor password installed in WebUI.
    #327708 [DVT][Insyde][BIOS] BIOS Items' sequence not same between Setup Utility and WebUI in Security page.

2A05:
- Fix E-Track issue 
    #330238 [DVT][Insyde] Hot Key F9 without function in PCH related pages under PCH Configuration page.
    #330220 [DVT][Insyde] "PCIe Port assigned to LAN" cannot be selected and modify.
    #329569 [DVT][Insyde] BIOS Uncore General Configuration "CPU Hot Plug Topology" settings does not report 2 sockets, it does not match S5X HW spec.
    #328745 [DVT][Insyde] Reboot system after system report error message for HDD security count, then key in HDD password again, system still report error message for                           HDD security count.
    #328721 [DVT][Insyde] BIOS Memory Topology information should gray out because it report information only. 
    #328557 [DVT][Insyde] Uncore Status information should be gray out because it only report information.
    #328552 [DVT][Insyde] After clear HDD Password and Master HDD Password password then reboot to BIOS menu setup those 2 password again, password cannot save and                           security function fail.
    #328453 [DVT][Insyde] BIOS settings "Set All HDD Password, Set All Master HDD Password" should display under Storage Password Setup Page function because those                           items are group function. 
    #328452 [DVT][Insyde] BIOS settings "Set All HDD Password, Set All Master HDD Password help txt do not define "Where and how to clear password?"
    #328153 [DVT][Insyde] BIOS setup Supervisor Password / User Password then setup Master HDD / HDD Password and reboot system, but HDD password does not setup                           completed.
    #328064 [DVT][Insyde] After enter HDD security password, Boot options "F2, DEL, F11, F12" does not workable. 
    #328054 [DVT][Insyde] After enter Hard disk Security password, boot options move to left side of POST screen. (F2, F11, F12, DEL)
    #327955 [DVT][Insyde]BIOS hang up after click "Set Storage Password", "Set Master Hdd Password" without Device Name of Storage Password Setup Page.
    #327845 [DVT][Insyde][BIOS] "Master Hdd Password" should not be set without HDD password based on the help text's description.(suggest set to grey out item)
    #327838 [DVT][Insyde][BIOS] SUT hang when try to set storage password/Master Hdd Password.
    #327767 [DVT][Insyde][BIOS] Device name show empty in Storage Password Setup Page.
    #327353 [DVT][Insyde][BIOS][User Experience] Suggest to stop on POST screen and have chance to boot into BIOS by hot-key(F2/DEL) replace reboot if there is no boot                                                  device found.
    #327284 [DVT][Insyde][BIOS] Driver Health Manager not support under Legacy mode.
    #326306 [DVT][Insyde] Some of items cannot be selected, but color of items are still in blue; It might be in gray if it is information item.
    #327595 [DVT][Insyde][BIOS] Add help text in Boot Device Type Order page for user that can reference.        
    #327760 [DVT][Insyde][BIOS] Add help text for device-USB/HDD/Network/DVDROM/Others for user that can reference.
    #328974 [DVT][Insyde] BIOS Help should define Page UP/Down Key function when BIOS interface information over 1 page.
    #326244 [DVT][Insyde] BIOS Advanced System Event log lost option "System Memory Poison" which does not match QCT_Whitley_BIOS_Specification_for_Insyde_0.5.
    #330211 [DVT][Insyde] The default value of PCIe Root Port Function Swapping not follow SPEC.
    #329290 [DVT][Insyde] Sometimes, BIOS report EPOCH warring message after browse BIOS settings (Sockect/ME/PCH configuration ..etc) without any change items and Exit                           Discarding Changes.
    #328530 [DVT][Insyde][BIOS] The item name "Redfish Bios Support" should be "BIOS"(uppercase).
    #327925 [DVT][SKU1] The BMC logged some SEL event related sensor "#0x66" after AC off/on the system.
    #327285 [DVT][Insyde][BIOS] Need to set "Network Stack" to hidden item due to this option will impact preserve function if disable.
    #326875 [DVT][Insyde][BIOS] The default value of Hardware P-States should be "Out of Band Mode".
    #326285 [DVT][Insyde][BIOS] When set User Access Level to "View Only" , most of items still can be modified.
    #328519 [DVT][Insyde][BIOS] BIOS Support Hash Algorithm not list SHA384 when TPM installed which support SHA384.
    #325758 [DVT][Insyde] BIOS setting option does not support "Shared NIC" function to switch "Dedicated-NIC" and "Share-NIC".
    #325846 [DVT][Insyde] Setup IPv4 Source from Static to DHCP then reboot system, BMC configuration IPv4 IP Address/Subnet Mask/Gateway Address report 0.0.0.0.
    #326238 [DVT][SKU13]The column mustn't show "undefined", it need to show components' name.
    #327020 [DVT][Insyde][BIOS] Setup Utility should have the IPv6 Source which can switch Static/DHCP.
    #328376 [DVT][Redfish] [DVT][Redfish] The BIOS settings value will display a space after GET /redfish/v1/Systems/[System ID]/Bios/Settings via redfish.
    #328971 [DVT][Insyde] After enter Execute H20 IPMI Utility, screen flash abnormal garbage and BIOS interface dividing line disappear.
    #328973 [DVT][Insyde] Both BIOS user interface and BIOS spec "IPv6 Dynamic IP 00" should change name to "IPv6 Dynamic IP Address." 
    #329009 [DVT][Insyde] FRU data take effect immediately after modified it then press Enter key in Setup Utility.
    #329024 [DVT][Insyde] No F9 function key in FRU info page that user cannot recovery the FRU data.
    #329025 [DVT][Insyde] No F10 function key in FRU info page for save and reset SUT.
    #329026 [DVT][Insyde] Suggest to set all FRU info to information only(grey out) that user cannot modify it via Setup Utility.
    #329039 [DVT][Insyde][BIOS] "Fru" should be uppercase for "Fru Area Commands" and "Get Standard Fru Info".
    #329254 [DVT][Insyde] The number of "Chassis Custom x" and "Board Custom x" are not same as FRU data.
    #329269 [DVT][Insyde] "Custom Field 3" for Chassis Info and Board Info not show in Setup Utility.
    #329388 [DVT][Insyde] Suggest to set all SDR info to information only(grey out) in Setup Utility.
    #329391 [DVT][Insyde] Please modify the help text for "SDR List Support" that the grammar is wrong.
    #329410 [DVT][Insyde][Rule] The default setting of "Watchdog Timer Action" should set to [No Action] on EVT/DVT and set to [Hard Reset] on PVT stage.
    #329472 [DVT][Insyde] The pop-up message define the max value for "User ID" is [0], but the default setting shows [1] which not match the message's definition.
    #329479 [DVT][Insyde] Need to define the correct range in help text for "User ID".
    #329485 [DVT][Insyde] "User ID" only can set to [0] which not match SPEC's definition.
    #329488 [DVT][Insyde] Base on the pop-up message, "User ID" can input [0] but the value will not change after click Yes.
    #329494 [DVT][Insyde] Please add the help text for User Status.
    #329502 [DVT][Insyde] Please add the help text and password rule for User Password under User Configuration page.
    #329590 [DVT][Insyde] Please add the help text for "Privilege" in User Configuration page.
    #329592 [DVT][Insyde] BIOS Execute IPMI Command > BMC Device and messaging commands > User Setting > User Enable. User Interface selection window has garbage.
    #329595 [DVT][Insyde] BIOS Execute IPMI Command > SOL Configuration Parameters Command > Parameter selector. User Interface selection window has garbage.
    #329598 [DVT][Insyde] BIOS Execute IPMI Command > SOL Configuration Parameters Command > Set In Progress. User Interface selection window has garbage.
    #329606 [DVT][Insyde] BIOS Execute IPMI Command > Set Serial/Modem Mux > Mux settings. User Interface selection window has garbage.
    #329610 [DVT][Insyde] BIOS Execute IPMI Command >LAN Configuration Parameters >IP Address Source. User Interface selection window has garbage.
    #329692 [DVT][Insyde] Fail to add User by select "Add current setting to list" in Setup Utility after load BIOS default.
    #329701 [DVT][Insyde] The setting of Privilege will change after modify channel.
    #330210 [DVT][Insyde] The default value of Max Detect Time(Sec) not follow SPEC.
    #329531 [DVT][SKU13]ME backup/ operational/ recovery firmware version show "N/A" in system information page.
    #328187 [DVT][Insyde] The SOL screen not renew after press F2/DEL/F11/F12 during POST.
    #329091 [DVT][Insyde] BIOS Intel SGX function does not ready.

2A04:
- Fix E-Track issue 
    #326788 [DVT][Insyde][BIOS] The default value of Correctable Error Threshold should be 1 on DVT stage.
    #326748 [DVT][Insyde][BIOS] Need to define the default threshold for Memory Correctable Error Threshold.
    #326634 [DVT][Insyde][BIOS] The default value of Enhanced SDDC not follow SPEC.
    #328556 [DVT][Insyde] BIOS setting Uncore Per Socket Configuration report 4 CPU, it does not sync Uncore Status and S5X HW spec design 2 CPU.
    #328431 [DVT][Insyde] After clear password by jumper, POST report 0xA10: Password cleared by jumper which does not match                                                     QCT_Whitley_BIOS_Specification_for_Insyde_0.6 defined "0xA103".
    #328110 [DVT][Insyde][BIOS] The wording of "Harddisk" is incorrect in pop up message during POST when HDD password is set.
    #328093 [DVT][Insyde][BIOS] The item name of "Set All Hdd Password" and "Set All Master Hdd Password" should be "HDD", not "Hdd".
    #327226 [DVT][Insyde] At Legacy mode, BIOS POST QCT logo is too fast to choice BIOS boot options (F2, F11, DEL..etc..). 
    #326962 [DVT][Insyde][BIOS] There is no time countdown during POST if set timeout to non-zero.
    #326663 [DVT][Insyde] BIOS POST report BMC IPv6 address 0:0:0:0:0:0:0:0, it does not sync BIOS BMC configuration and BMC WebUI IPv6 address.
    #326657 [DVT][Insyde] When power on system, BIOS POST report 0xA10: Redfish Check Connection to BMC failed.
    #326464 [DVT][Insyde] BIOS POST does not report 0xA105 BMC Failed (No Response) after disable BMC by SW1 BIT2 jumper.
    #326313 [DVT][Insyde] Recommend using "GB" instead of "MB" to display Total Memory Size; showing "GB" might be more intuition than "MB".
    #326306 [DVT][Insyde] Some of items cannot be selected, but color of items are still in blue; It might be in gray if it is information item.
    #326226 [DVT][Insyde][BIOS] Based on the help text, password required only occurs when go to the Setup Utility if Power on Password set to Disabled.
    #326039 [DVT][Insyde] SMBIOS Type 17 report Configured Memory Speed is 2934MT/s, but BIOS spec and HW spec defined 2933MT/s.
    #326038 [DVT][Insyde] BIOS Memory Topology memory speed report 2934MT/s, it does not match BIOS spec and S5X HW spec defined 2933MT/s.
    #326030 [DVT][Insyde] BIOS Main menu report System Memory Speed is 2934 MT/s that does not match S5X_HW&Product_Spec_Rev_0p03 defined Memory Speed 2933 MT/s.
    #325697 [DVT][Insyde] After Clear CMOS, BIOS POST report "A104 CMOS/NVRAM configuration cleared". It does not match QCI_SPX_EventLogTable_v4_57 and                                          QCT_Whitley_BIOS_Specification_for_Insyde_0.5 defined.
    #324945 [S5X][DVT][Insyde] BIOS has no settings of restore on AC power loss function (power off, power on, no change, last state)
    #324154 [S5X][DVT][Insyde][ACPI] The string of Creator ID, OEMID and OEM Table ID at XSDT need to be discussed.
    #325024 [S5X][DVT][Insyde] S5X HW spec define that system support PCIE Gen4, but SMBIOS report capability is PCIE Gen3.
    #325861 [DVT][Insyde] It appear "afterimage" after pressing "ESC" to exit the dialog box of "Custom Boot Option Name" from BIOS\ Boot Manager\ Manage Custom                           Boot Options.
    #326181 [DVT][Insyde][performance] BIOS menu display freeze about 3 seconds after Load Optimal Defaults.
    #326195 [DVT][Insyde][BIOS] No "SHELL" option and extra "Others" option list in "Boot Device Type Order" page which not follow the SPEC's definition.
    #326198 [DVT][Insyde][BIOS] The default setting of Boot Device Order which not follow the SPEC's definition.
    #326201 [DVT][Insyde] BIOS Security options HDD Password /Master HDD Password does not defined at QCT_Whitley_BIOS_Specification_for_Insyde_0.5.
    #326205 [DVT] The WebUI has provide menu format, but only one option for this item on WebUI > BIOS > Main page.
    #326215 [DVT][Insyde] BIOS Security options Storage Password Setup page does not defined at QCT_Whitley_BIOS_Specification_for_Insyde_0.5.
    #326217 [DVT][S5X] BIOS Security TPM's options (Clear TPM, TPM algorithm, TrEE protocol..etc. ) does not match QCT_Whitley_BIOS_Specification_for_Insyde_0.5.
    #326224 [DVT][Insyde][BIOS] SPEC does not define option "Power on Password".
    #326225 [DVT][Insyde][BIOS] SPEC does not define "User Access Level" and "Set User Password" in 1.4.2.3 Security Screen.
    #326227 [DVT][Insyde] BIOS Security Current TPM Device report "TPM 2.0 (DTPM)" which does not match QCT_Whitley_BIOS_Specification_InsydeVersion_0.5 defined "TPM                           2.0".
    #326243 [DVT][Insyde][BIOS] The description of key function under Setup Utility not match with SPEC.
    #326250 [DVT][Insyde][BIOS] The options of Language under Main page not follow SPEC.
    #326256 [DVT][Insyde][BIOS] The format of System Date does not match with SPEC.
    #326271 [DVT][Insyde][BIOS] The help text of System Time does not match with SPEC.
    #326277 [DVT][Insyde][BIOS] Based on the help text, User Access Level lack the "No Access" option.
    #326300 [DVT][Insyde][BIOS] Need to define which limited fields can be changed when set User Access Level to "Limited".
    #326324 [DVT][Insyde][BIOS] The help text of Language does not match with SPEC.
    #326327 [DVT][Insyde][BIOS] The help text of System Date does not match with SPEC.
    #326360 [DVT][Insyde][BIOS] Need to define the Supervisor and User password can't be the same one.
    #326363 [DVT][Insyde][BIOS] Supervisor and User password will be preserved after press F9(load defaults) which not follow SPEC.
    #326386 [DVT][Insyde] BIOS and QCT_Whitley_BIOS_Specification_for_Insyde_0.5 need to remove unsupport Memory Frequency.
    #326402 [DVT][Insyde][BIOS] The behavior of user privilege not follow SPEC's definition.
    #326441 [DVT][Insyde][BIOS] Remove PTT related options/info in BIOS/SPEC due to not support.
    #326486 [DVT][Insyde][BIOS] Please add the empty slot info for memory in memory topology page.
    #326498 [DVT][Insyde][BIOS] Please add note for bitmap that disabling all cores is an invalid configuration.
    #326561 [DVT][Insyde][BIOS] The info of Secure Boot not define in QCT_Whitley_BIOS_Specification_for_Insyde_0.5_20200604
    #326674 [DVT][Insyde] The item "Server ME firmware features list" should be upper cases for all characters like => "Server ME Firmware Features List".
    #326678 [DVT][Insyde] The naming "File Explorer" in Boot From File should be "Boot From File".
    #326679 [DVT][Insyde] The naming "InsydeH20 Setup Utility" in Setup Utility should be "Setup Utility".
    #326680 [DVT][Insyde] There are lots of items related to PCIe Root Port appeared in "Boot From File".
    #326790 [DVT][Insyde][BIOS] Need to define the default value for Leaky Bucket high/low bit..
    #326813 [DVT][Insyde][BIOS] Need to define the UPI/PCIE error with the leaky time/threshold in SPEC.
    #326951 [DVT][Insyde][BIOS] The leaky bucket for memory is 16s so need to modify Leaky bucket high/low bit.
    #326958 [DVT][Insyde][BIOS] Need to define the default value of "Timeout".
    #326960 [DVT][Insyde][BIOS] Need to define the range of "Timeout" in help text(SPEC/Setup Utility).
    #327127 [DVT][Insyde][BIOS] The default setting of Volatile Memory Mode not follow SPEC.
    #327129 [DVT][Insyde][BIOS] The Help Text of Volatile Memory Mode not follow SPEC.
    #327130 [DVT][Insyde][BIOS] The options of Volatile Memory Mode not follow SPEC.
    #327208 [DVT][Insyde] Setup Watchdog timer timeout then idle at BIOS Front Page, system will reset/power down/ power cycle when timeout. But BIOS spec defined                           watchdog for POST.
    #327240 [DVT][Insyde] At legacy mode, BIOS Front page options lost "Boot from file, Administer Secure Boot" which does not match                                                     QCT_Whitley_BIOS_Specification_for_Insyde_0.5 defined.
    #327270 [DVT][Insyde][BIOS] Based on the SPEC's definition, AppDirect cache need to set to hidden.
    #327272 [DVT][Insyde][BIOS] Help Text format of Network Stack not match with SPEC.
    #327315 [DVT][Insyde][BIOS] No field can set the IPv6 Router IP address.
    #327317 [DVT][Insyde][BIOS] No field can set the IPv6 Router Prefix Length.
    #327352 [DVT][Insyde][BIOS] Please define the behavior and message if there is no boot device found in SPEC.
    #327370 [DVT][Insyde][BIOS] SOL will show "DXE_ASSERT!" when creating Custom Boot Option.
    #327478 [DVT][Insyde][BIOS] All NIC devices which list in Boot From File page even disable it.
    #327627 [DVT][Insyde][BIOS] Create one Custom Boot Option then discard changes, the boot option still exist in the Boot Option Menu.
    #327709 [DVT][Insyde][BIOS] SPEC not define "Storage Password Setup Page" and "TLS Certificate Manager" which in Security page.
    #327847 [DVT][Insyde][BIOS] The item name of "Master Hdd Password" not same as help text's description and should be "HDD".
    #328158 [DVT][Insyde][BIOS] The item name of "PCIE Break Event" should be "PCIe", not "PCIE".(Please also check all in Setup Utility and SPEC)
    #328174 [DVT][Insyde] BIOS 2A03 UART Port 1 Configuration settings is "ready only", it does not match BIOS spec 0.6 defined item is "Selection."
    #327581 [DVT][Insyde] BIOS BMC SDR list sensor BMC_CPU_Util and BMC_Mem_Util report "unspeccified", but BMC WebUI and IPMI report "percent".
    #326037 [DVT][Insyde][BIOS] ikvm screen size will change randomly when enter password during POST or BIOS menu.
    #327575 [DVT][Insyde] Insyde BIOS has no "BMC Self Test Status" to check BMC status.
    #328520 [DVT][Insyde][BIOS] Please define what is "0" in help text when set "TPM Availability" to "Hidden".
    #328521 [DVT][Insyde][BIOS] The help text for "TPM Availability" is fullwidth format.

2A03:
- Fix E-Track issue 
    #326065 [DVT][Insyde] BIOS BMC Event log viewer SEL log report "Undefined" after login BMC WebUI with invalid Username and Password.
    #326187 [DVT][Insyde][BIOS] Remove FDD(Floppy Drive) info in QCT_Whitley_BIOS_Specification_for_Insyde due to not support it.
    #326046 [DVT][Insyde][BIOS] Failed to set Supervisor Password with 2 characters.
    #325856 [DVT][Insyde] There are some debug messages during POST process; It might be no need to be appeared.
    #325852 [DVT][Insyde] Characters of "I350-T4 OCP 3.0 LAN card" flashed continuously under BIOS\ Boot Manager.
    #325697 [DVT][Insyde] After Clear CMOS, BIOS POST report "A104 CMOS/NVRAM configuration cleared". It does not match QCI_SPX_EventLogTable_v4_57 and                                       QCT_Whitley_BIOS_Specification_for_Insyde_0.5 defined.
    #325524 [S5X][DVT][Insyde] SMBIOS Type 1 Wake-up Type is Power Switch, but it should keep "Reserved"
    #324712 [S5X][DVT][Insyde] BIOS report CPU processor version is "Genuine Intel(R) CPU $0000%@" which does not match Intel DCL QU99 defined "Genuine Intel(R)                                     Xeon(R) CPU 2.20 GHz."
    #324643 [S5X][DVT][Insyde] SMBIOS Type 3 Data "Manufacturer, Version, Serial Number, Asset Tag, Height, Number Of Power Cords, SKU Number" is wrong.
    #324601 [S5X][DVT][Insyde] SMBIOS Type 2 "Manufacturer", "Product Name", "Version", "Serial Number", "Asset Tag" should be show "To be filled by O.E.M."                                because BMC FRU data is empty.
    #324587 [S5X][DVT][Insyde] SMBIOS Type 1 "Manufacturer", "Product Name", "Version", "Serial Number", "SKU Number", Family should be show "To be filled by             O.E.M." because BMC FRU data is empty.
    #324503 [S5X][DVT][Insyde] SMBIOS Type 0 lost 4 BIOS Characteristics. (BIOS ROM is socketed, Int 5h, print screen, Int 14h, serial services, Int 17h, printer                                       services)
    #324358 [S5X][DVT][Insyde] SMBIOS Type 0 has some feature that platform does not support. (floppy, 8042 KB service, CGA/mono video service)
    #323328 [S5X][DVT][Insyde][Setup_Utility]Socket0 has extra item of TraceHub and DMI 
    #326035 [DVT][Insyde] Memory Topology DIMM slot name does not match S5X_HW&Product_Spec_Rev_0p03 defined CPU0_XX/CPU1_XX.
    #325796 [DVT][Insyde] BIOS Server ME configuration report 4 PSU, but system only support 2 PSU.
    #325515 [S5X][DVT][Insyde] System has no ACPI SPCR table after enable "SPCR table support" which does not match QCT_Whitley_BIOS_Specification_for_Insyde_0.5                                     defined.
    #325181 [S5X][DVT][Insyde] SMBIOS Type 8 connector name does not match HW spec and MB slikscreen. (J15, J48, J100, J127, J133, J134)
    #325140 [S5X][DVT][Insyde] SMBIOS Type 41 Onboard Device "VGA" should be "Onboard VGA"
    #325118 [S5X][DVT][Insyde] BIOS does not support RSD by MKT, QCT_Whitley_BIOS_Specification_for_Insyde should remove RSD function.
    #325026 [S5X][DVT][Insyde] SMBIOS does not report Type 198 which does not match QCT_Whitley_BIOS_Specification_for_Insyde_0.5.
    #325024 [S5X][DVT][Insyde] S5X HW spec define that system support PCIE Gen4, but SMBIOS report capability is PCIE Gen3.
    #324960 [S5X][DVT][Insyde] SMBIOS does not report Type 194 data w/ insert PCIE NVME SSD to SUT.
    #324927 [S5X][DVT][Insyde] SMBIOS Type 192 report only one PCIE device. It should report all PCIE devices.
    #324778 [S5X][DVT][Insyde] SMBIOS report Type 15, 21, 22, 26, 27, 28, 32, 39, 40, 42, 128, 129, 130. But QCT_Whitley_BIOS_Specification_for_Insyde_0.5 does not                                     support those items.
    #324152 [S5X][DVT][Insyde][ACPI] WDDT is not defined at Insyde BIOS Spec, but it appears in ACPI table.
    #324150 [S5X][DVT][Insyde][ACPI] WSMT is not defined at Insyde BIOS Spec, but appears in ACPI table with unknown signature.
    #324149 [S5X][DVT][Insyde][ACPI] HMAT is not defined at Insyde BIOS Spec, but appears in ACPI table with unknown signature.
    #324146 [S5X][DVT][Insyde][ACPI] BDAT is not defined at Insyde BIOS Spec, but it appears in ACPI table.
    #324135 [S5X][DVT][Insyde][ACPI] Insye BIOS define support PCCT, RASF, PMTT, SPCR, BERT, EINJ, HEST and NFIT , but they can not found in ACPI tables.
    #324126 [S5X][DVT][Insyde][ACPI] Insyde BIOS Spec. defines support FIDT table but it can be found in the ACPI table.
  
2A02:
- Fix E-Track issue 
    #323423 [S5X][DVT][Insyde][Setup_Utility] There are many sensors are no reading/value in SDR List.
    #323329 [S5X][DVT] [Insyde][BMC] There are two Redfish Error message at POST.
    #323298 [S5X][EVT2][Insyde][Setup_Utility]There are CPU Socket 2 and 3 in the Setup Utility.(S5X only support 2 CPU socket)
    #323129 [S5X][EVT2][Insyde][SMBIOS] [Type3] "Power Cord Number" and "Heigh" of SMBIOS does NOT obey the definition in SMBIOS Godlen document.
    #323126 [S5X][EVT2][Insyde][SMBIOS] [Type2] "Location In Chassis" of SMBIOS does NOT obey the definition in SMBIOS Godlen document.
    #323123 [S5X][EVT2][Insyde][SMBIOS] [Type1] "Family" Name of SMBIOS does NOT obey the definition in SMBIOS Godlen document.
    #322250 [S5X][EVT2][Insyde][SMBIOS] The Firmware Revision of SMBIOS Type 0 is different with BMC ReleaseNote release.
    #321432 [S5X][EVT2][Insyde][BIOS Setup] There is no BMC IP address at POST screen.(Define by QCT std. spec for Whitley platform)
    #324471 [S5X][DVT][Insyde] QCT_Whitley_BIOS_Specification_InsydeVersion_0.5 report support Floppy Drive that does not match S5X_HW&Product_Spec_Rev_0p03 defined
    #323427 [S5X][DVT][Insyde][SMBIOS] [Type19] Amount of Memory Device in SMBIOS type 19 is "48", but S5X only supports 32 DIMMs.
    #323165 [S5X][EVT2][Insyde][SMBIOS] [Type13] There are 3 additional language shown in SMBIOS Type 13. (Need Insyde BIOS double confirm)
    #323161 [S5X][EVT2][Insyde][SMBIOS] [Type11] "String" of SMBIOS Type 11 does NOT obey the definition in SMBIOS Godlen document.
    #323148 [S5X][EVT2][Insyde][SMBIOS] [Type4] "Socket Designation" of SMBIOS does NOT obey the definition in SMBIOS Godlen document.
    #322075 [S5X][EVT2][Insyde] System hang up during BIOS POST(0x30) on DC cycle test loop 5 with BIOS 1A04, BMC 1.00.
    #321919 [S5X][EVT2][Insyde][BIOS_SetUp] Please base on HW Spec to proclaim CPU Socket 0/1 PCIe port configuration of BIOS Setup Utility.
    #321184 [S5X][EVT2][Insyde][SMBIOS] The "Bank Locator" start from NODE 0 and it is different from the definition of QCT SMBIOS Golden File.
    
2A01:
- Fix E-Track issue 
    #322589 [S5X][EVT2][Insyde][BIOS_SetUp] Setup Utility has "WHEA Error Injection 5.0 Extension" item but it does NOT exit in Insyde SetupItems document.
    #321928 [S5X][EVT2][Insyde][BIOS_SetUp] Suggest use up and down circulate function in BIOS Setup/Setup utility.
    #321919 [S5X][EVT2][Insyde][BIOS_SetUp] Please base on HW Spec to proclaim CPU Socket 0/1 PCIe port configuration of BIOS Setup Utility.
    #321792 [S5X][EVT2][Insyde][BIOS_SetUp] BIOS Spec needs to add the definition of Whole Front Page.
    #321777 [S5X][EVT2][Insyde][BIOS_SetUp] Need Insyde BIOS RD provide no Change items when BIOS flash with -NV parameter in BIOS SetupItems document.
    #321713 [S5X][EVT2][Insyde][BIOS Setup] BIOS Sepc hasn't define the string for pressing DEL or F2 Key.
    #321450 [S5X][EVT2][Insyde][BIOS Setup] Even though BIOS Spec defines "No options" for "Perf P-Limit" item, it still has sub-option in BIOS Setup Menu.
    #321445 [S5X][EVT2][Insyde][BIOS Setup] Insyde "Insyde_S5X_SetupItems_V0.5_2020_0512.xlsx" has no "Perf P-Limit" item but both BIOS Spec. and BIOS Setup Menu                                             have it.
    #321056 [S5X][EVT][Insyde]PCIe LAN card can NOT be recognized under BIOS SetUp Menu.
    #320539 [S5X][EVT][Insyde] Can NOT change boot order under BIOS setup utility.
    #320323 [S5X][EVT][Insyde] SUT will automatically reboot when we enter BIOS SetUp Menu and idle about 4.5 to 5 minutes.
    #321926 [S5X][EVT2][Insyde][BIOS_SetUp] BIOS Spec needs to define string content after pressing Hot Key.
    #321925 [S5X][EVT2][Insyde][BIOS_SetUp] BIOS Spec need to define Hot Key Explanation location.
    #321790 [S5X][EVT2][Insyde][BIOS_SetUp] BIOS Spec needs to add the definition for ESC Funtion key.
    #321703 [S5X][EVT2][Insyde][BIOS Setup] After "Quiet Boot : Disable", system will occur nosie on the screen during POST when press "DEL" enter into BIOS Setup.
    #321527 [S5X][EVT2][Insyde][BIOS Setup] We can't stop the POST diagnostic screen via "Pause" key.
    #321464 [S5X][EVT2][Insyde][BIOS Setup] Enter BIOS Setup string at POST screen does not synchronize with BIOS Spec..
    #321435 [S5X][EVT2][Insyde][BIOS Setup] There is some BIOS Revision error at POST screen.
    #321431 [S5X][EVT2][Insyde][BIOS Setup] POST will not show the CPU, Memory, HDD, SSD or USB information at POST Diagnostic screen define by QCT std for Whitley                                             pltform.
    #321870 [S5X][EVT2][Insyde][BIOS_SetUp] Network Name in Boot category of Setup Utility should follow QCT Naming Rule.
    #321648 [S5X][EVT2][Insyde][BIOS_SetUp] BIOS SetupItems document does NOT provide preserve item after F9- load default.
    #322486 [S5X][EVT2][Insyde][BIOS_ITP] Can trigger SDDC x4 Error Injection, but there is no related log under BMC WebUI. (AttributeError: 'ICX_Moka' object has no                                           attribute 'm2mem_errors' for "klaxon.m2mem_errors()" ITP command)
    #322164 [S5X][EVT2][Insyde][BIOS_ITP] Can trigger PCIe Correctable Error Injection, but there is no related log under BMC WebUI.
    #322162 [S5X][EVT2][Insyde][BIOS][ITP] Can trigger PCIe Uncorrectable Non-Fatal Error Injection, but there is no related log under BMC WebUI.
    #322159 [S5X][EVT2][Insyde][BIOS_ITP] Can trigger PCIe Uncorrectable Fatal Error Injection, but there is no related log under BMC WebUI.
    #322158 [S5X][EVT2][Insyde][BIOS_ITP] Can NOT trigger DMII UnCorrectable Fatal Error Injection. (Fail: PCIe injectors are disabled in errinjcon; can't override this                                           - need BIOS to not set this bit)
    #322151 [S5X][EVT2][Insyde][BIOS_ITP] Can trigger CPU UPI Correctable Error Injection, but there is no related log occur under BMC WebUI.
    #322043 [S5X][EVT2][Insyde][BIOS_ITP] Can NOT trigger DMI Correctable Error. (Fail: PCIe injectors are disabled in errinjcon; can't override this - need BIOS to not                                           set this bit)
    #322042 [S5X][EVT2][Insyde][BIOS_ITP] Can NOT trigger DMI Un-correctable Non-Fatal Error.(PCIe injectors are disabled in errinjcon; can't override this - need BIOS                                           to not set this bit)
    #322041 [S5X][EVT2][Insyde][BIOS_ITP] Can trigger Memory Un-correctable Error, but there is no related log occur under BMC WebUI.
    #322040 [S5X][EVT2][Insyde][BIOS_ITP] Can trigger Memory Correctable Error, but there is no related log occur under BMC WebUI.
    #321621 [S5X][EVT2][Insyde][ITP] Need Insyde to implement the "Leaky Bucket" feature (QCT project request) for Whitley ITP error injection test.

1A04:
- Fix E-Track issue 
    #321387 [S5X][EVT2][Insyde][SMBIOS] Type41 onboadr VGA Controller address is NOT the same as the address of Rehat lspci -D command.
    #321184 [S5X][EVT2][Insyde][SMBIOS] The "Bank Locator" start from NODE 0 and it is different from the definition of QCT SMBIOS Golden File.
    #321182 [S5X][EVT2][Insyde][SMBIOS] The Maximum Capacity is over maximum DIMM size of HW Spec.
    #321172 [S5X][EVT2][Insyde][SMBIOS] All "Length" claim in SMBIOS type 9 is "other", but it should be "long" or "short".
    #321171 [S5X][EVT2][Insyde][SMBIOS] The Bus Address of OCP 3.0 LAN card and M.2 PCIe SSD show in SMBIOS type 9 does NOT synchronize with the result of "lspci or lspci -D" under OS.
    #321170 [S5X][EVT2][Insyde][SMBIOS] OCP 3.0 LAN card and M.2 PCIe SSD can NOT show in SMBIOS type 9 (Current Usage: Other) it but can be recognized under OS.
    #321093 [S5X][EVT2][Insyde][SMBIOS] Type 0 has no BMC Revision.
    #321095 [S5X][EVT][Insyde][SMBIOS] Type 0 has wrong BIOS Revision.
    #321069 [S5X][EVT2][Insyde]The format of Build Date in release note of BIOS 1A03  conflicts with the definition of QCT SMBIOS Golden file.

1A03:
- N/A.

1A02:
- Fix the issue that can't get board ID table from EEPROM.

1A01:
- N/A.

[END OF RELEASE NOTES]
